Yamaha 02R96-v2 Owner's Manual download pdf (Page 38)

38 Chapter 2—Control Surface & Rear Panel

02R96 Version 2—Owner’s Manual

AD Input Section

AD Input #1 is shown at the top; AD Inputs #17 and #18 below

A INPUT A & B (BAL) connectors

AD Inputs 1 through 16 feature balanced XLR-3-31-type connectors and bal-

anced 1/4-inch phone jacks, both with a nominal input range of –60 dB to

+10 dB. Phantom powering (+48 V) is supplied to the XLR-type connectors, with

individual ON/OFF switches on each input. The phone jacks, which can also be

used with unbalanced phone plugs, have priority over the XLR-type connectors,

so when a phone plug is inserted, the XLR-type connector is disconnected. AD

Inputs 17–24 feature balanced 1/4-inch phone jacks. AD Inputs can be patched

individually to the Input Channels or Insert Ins. See “AD Input Section” on page

53 for more information.

B INSERT I/O +4dB (UNBAL) connectors (AD 1–16)

These unbalanced 1/4-inch TRS phone jacks are used to insert external signal pro-

cessors, etc., into AD Inputs 1 through 16. They are wired: sleeve–ground,

ring–return, tip–send. The nominal signal level is +4 dB. Inserts can be turned on

and off individually by using the INSERT ON/OFF switches. See “AD Input Sec-

tion” on page 53 for more information.

Male XLR plug

1 (ground)

2 (hot)

3 (cold)

1/4" TRS phone plug

Tip (hot)

Ring (cold)

Sleeve (ground)

1/4" phone plug

Tip (send)

Sleeve (ground)

Tip (return)

1/4" TRS phone plug

Sleeve (ground)

Tip (send)

Ring (return)

To processor’s input

From processor’s output

Connect to INSERT jack

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 349 350

No comments

Yamaha 02R96-v2 Owner's Manual Page 38