180
Feature Reference
●
Appendix
●
Amplifier, Mixer, Connection Problems
Symptom
Possible Cause
• Is the amplifier/mixer power turned on?
• Is the amplifier/mixer volume set to an appropriate level?
• Are the VL1-m outputs properly connected to the amplifier/mixer
inputs?
• Are the connection cables shorted, open, or otherwise faulty?
• Is the VL1-m connected to a high-sensitivity microphone or
instrument input on your amplifier or mixer? Try turning the VL1-
m DOWN controls down to avoid overloading the amplifier/mixer
inputs.
• Check the level and pan controls on the sound system/mixing
console being used with the VL1-m.
No sound.
Distorted sound.
Improper stereo positioning.
●
Utility Setting Problems
Symptom
Possible Cause
• Is the local off mode selected (page 154)?
• Are the MIDI transmit channel and receive channels matched to
those of the external MIDI device used (page 154)?
• Is the master tune parameter set properly (page 153)?.
• Is the TG Setting Reverb parameter turned “on” (page 153)?.
• Are the controllers on your MIDI keyboard or other instrument
assigned to the appropriate control change numbers?
No Sound
Wrong pitch.
No reverb.
Improper controller operation.
Comments to this Manuals