Yamaha VL1 Owner's Manual Page 113

  • Download
  • Add to my manuals
  • Print
  • Page
    / 195
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 112
109
Feature Reference
Edit Mode
Phase (Modulator only)
0deg 360deg.
This parameter is provided for the modulator block only. It allows a degree of
timbral variation by varying the phase of the modulator signal through 360 degrees in 2-
or 3-degree increments.
Index (Modulator only)
0 127.
Determines how much modulation is applied to the carrier signal (i.e. the level of
the modulator signal applied to the carrier). The higher the value the greater the modula-
tion.
Notes On Using the Harmonic Enhancer
Although any modulator source signal can be applied to any carrier
source signal, two approaches are recommended when attempting to create
an acoustic instrument simulation.
The first is to set the carrier signal to “Normal” and the modulator
signal to any other than normal, set the dry/wet “Balance” to 63 (all wet),
and set a relatively high “Index” value. In this case the total output of the
instrument model (“Normal” signal) will by modulated by one of the
component signals, so the dry/wet “Balance” can be set to fully wet
(carrier output only) since the carrier source and dry signals are essentially
the same. The Index parameter determines how much modulation is
applied, so a higher value is generally required to create sufficient variation.
The second approach is to set the carrier signal to any other than
normal and the modulator signal to any of the six possibilities, set the dry/
wet “Balance” to a more central value, and set a relatively low “Index
value. In this situation it is necessary to set the “Balance” more toward
the “Dry” side since the carrier source signal is
not the normal signal and
at least some of the dry signal is necessary to provide the basic sound of
the instrument model. In other words, the sound produced by the Harmonic
Enhancer is simply added to the basic sound of the instrument, in contrast
with the first approach in which the basic sound of the instrument is modu-
lated directly.
Please note that these are only guidelines, and are by no means the
only way to work with the Harmonic Enhancer. Since the Harmonic En-
hancer tends to respond differently with different instrument models,
experimentation and experience are your most valuable tools.
Element Modifier
Page view 112
1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 194 195

Comments to this Manuals

No comments