Yamaha LS2000 Operator's Manual download pdf (Page 74)

4-1

STORAGE

Storing your Jet Boat for prolonged

periods of time, such as winter storage,

requires preventative maintenance to

ensure against deterioration. It is advis-

able to have the Jet Boat serviced by

an authorized Yamaha Jet Boat dealer

before storage. However, the following

procedures can be performed by the

owner with a minimum of tools.

FUEL SYSTEM

Top off the fuel tank with fresh fuel,

adding one ounce of Yamaha Fuel

Conditioner and Stabilizer or an equiv-

alent to each gallon of fuel. A full fuel

tank is less likely to allow condensation

to collect in the tank, reducing the

chance of contaminated fuel. Running

the engines with treated fuel during

cooling system flushing will also help

protect carburetors and fuel lines.

NOTE: Use of Yamaha Fuel

Conditioner and Stabilizer eliminates

the need to drain the fuel system.

Consult your Yamaha dealer or other

qualified mechanic if the fuel system is

to be drained instead.

COOLING SYSTEM FLUSHING

➀ Flush Hose Connector

➁ Garden Hose Adapter

➂ Cap

Cooling system flushing is essential to

prevent the cooling system from clog-

ging up with salt, sand, or dirt.

1) Open the cap for the engine you are

going to flush. Press the flush kit

garden hose adapter into the flush

hose connector and turn until they

are securely connected.

2) Start the engine, then immediately

turn on the water supply fully.

● Never turn on the water before

starting the engine. The water

could flow back through the muf-

fler into the crankcase causing

severe engine damage.

● Be sure to turn on the water

immediately after starting the

engine to prevent engine over-

heating.

3) Run the engine at a fast idle for

10~15 minutes.

CAUTION:

M

AINTENANCE & CARE 4

1

2

3

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 111 112

Comments to this Manuals

No comments