Yamaha LS2000 Operator's Manual download pdf (Page 48)

NOTE: Pre-operation checks should be

made each time the boat is used. This

procedure can be accomplished thor-

oughly in a short time. The added safe-

ty and reliability the checks assure is

worth the time involved.

CHECK POINTS

Steering

Make sure the wheel is not loose.There

should not be any free play, either in-

and-out or in rotation. Turn the steering

wheel full-right and full-left to make

sure operation is smooth and unre-

stricted throughout the whole range.

Make sure both jet nozzles change

directions as the steering wheel is

turned. The jet nozzles should point to

starboard (right) when the wheel is

turned right. The jet nozzles should

point to port (left) when the wheel is

turned left. There should not be free

play between the steering wheel and

the jet nozzles.

Throttle

Operate the throttle levers several

times to make sure there is no hesita-

tion in their travel. Operation should be

smooth over the complete range of

motion, and each lever should return

completely to the idle position.

Shifting

Before launching, make sure both jet

pump gates drop down over the jet noz-

zles to their stopper positions when the

shift lever is moved to the “Reverse”

position. Also make sure both jet pump

gates return to the full up stopper posi-

tion when the shift lever is moved to the

“Forward” position.

OPERATION 3

3-5

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 111 112

Comments to this Manuals

No comments