Yamaha LS2000 Operator's Manual download pdf (Page 55)

Storing

In The Upright Position

1) Raise the rear support poles to the

highest position.

2) Unhook the front straps and pull the

top to the back.

3) Roll the fabric around the frames

and zip the storage cover in place.

Do not trailer the boat with the

Bimini top in the fully extended or

upright storage positions. Put the

cover in the fully collapsed position

to avoid damage.

Storing

In The Fully Collapsed Position

1) Follow the steps for storing in the

upright position.

2) Remove the snap pins holding the

rear support poles to the mounting

brackets.

3) Lower the top onto the rear

deck/hatch.

4) Secure the rear support poles to the

main poles with the Velcro straps.

Trailering With The Bimini Top

The Bimini top must be secured to the

boat when it is being trailered. When

trailered with a Genuine Yamaha

Cover, simply store the Bimini top in

the fully collapsed position and install

the cover. If a cover is not used, wrap

an elastic cord around the top and

secure the ends to the ski tow hook to

restrict movement.

Removing the Bimini Top

1) Follow the steps for storing in the

fully collapsed position.

2) Remove the lock pins holding the

Bimini top to the mounting brackets.

3) The top can now be removed from

your Jet Boat.

When reinstalling the Bimini top, simply

reverse the removal steps making sure

the lock pins are fully engaged.

NOTE: The adjustable support pole

goes to the stern when reinstalling the

Bimini top.

3-12

3 OPERATION

CAUTION:

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 111 112

Comments to this Manuals

No comments