Yamaha RX-Z7 Owner's Manual Page 44

  • Download
  • Add to my manuals
  • Print
  • Page
    / 178
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 43
44 En
Playback
Connect a pair of headphones with a stereo
analog audio cable plug to the PHONES jack on
the front panel.
y
When you select a sound field program, SILENT CINEMA
mode activates automatically (page 51).
When you connect headphones, no signals are output at the
speaker terminals.
All digital multi-channel audio signals are mixed down to the
left and right headphone channels.
When “MULTI CH” is selected as the input source, only the
signals input at the MULTI CH INPUT FRONT jacks are
output.
Press
L
MUTE on the remote control to mute the
audio output. Press
L
MUTE again to resume
the audio output.
y
The VOLUME level indicator flashes while the mute function is
on.
You can configure the muting level with “Muting Type”
(page 95).
You can display the format, sampling frequency, channel,
bit rate and flag data of the current input signal.
1 Set the operation mode selector to FAMP
and then press 8STATUS on the remote
control.
The input source information screen appears in the
GUI screen.
2 Press 9l / h to toggle between the audio
and video information.
3 Press 8STATUS on the remote control
again to exit from the input source
information screen.
Audio information
“––” appears when this unit cannot display the corresponding
information.
Some high definition audio bitstream contents may not include
the discrete surround back left and right channel signals but are
encoded at the bitrate of 192 kHz.
Even if you make settings to output bitstreams directly, some
players convert the Dolby TrueHD or Dolby Digital Plus
bitstreams to the Dolby Digital bitstreams, while converting the
DTS-HD Master Audio or DTS-HD High Resolution Audio
bitstreams to the DTS bitstreams.
Using your headphones
Notes
Muting the audio output
PRESET/TUNING/CH
MULTI ZONE
MASTER
MAIN ZONE
INPUT
ON
OFF
MIC
OPTIMIZER
YPAO
SILENT CINEMA
PHONES
ON/OFF
PURE DIRECT
VOLUME
AUDIO SELECT/
REC OUT
PROGRAM
USB
VIDEO AUX
MENU ENTER
STRAIGHT
EFFECT
MEMORY
ZONE 2
SEARCH
MODE
ZONE ON/OFF
ZONE 3
STEREO/
MONO
ZONE 4
CATEGORY INFO
BAND
ZONE CONTROLS
TONE
CONTROL
RL
OPTICAL
HDMI IN
VIDEO AUX
AUDIO
S VIDEO
VIDEO
Displaying the input source
information
Format Signal format. When this unit cannot detect a
digital signal, it automatically switches to
analog input.
Sampling The number of samples per second taken from
a continuous signal to make a discrete signal.
Channel The number of source channels in the input
signal (front/surround/LFE). For example, a
multi-channel soundtrack with 3 front
channels, 2 surround channels and LFE, is
displayed as “3/2/0.1”.
Bitrate The number of bits passing a given point per
second.
Dialogue The dialogue normalization level preset to the
current input bitstream signal.
Flag1/Flag2 Flag data encoded in the bitstream, or PCM
signals that cue this unit to automatically
switch decoders.
Notes
Page view 43
1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 177 178

Comments to this Manuals

No comments