Yamaha DSP-Z9 Owner's Manual download pdf (Page 34)

100

101

AUTO SETUP

For best results, make sure the room is as quiet as possible

during the auto setup procedure. If there is too much

ambient noise, the results may not be satisfactory.

If your subwoofer can adjust the output volume and crossover

frequency, set the volume to about half way (or slightly less), and

set the crossover frequency to the maximum.

1 Switch on the unit and video monitor, then

press TOP on the GUI remote control.

The TOP display appears.

2 Press k/n repeatedly to select Auto Setup,

then press h.

3 Press k/n repeatedly to select Setup Menu,

then press h.

4 Press k/n repeatedly to select Wiring,

Distance, Size, Equalizing or Level.

For Wiring, Distance, Size or Level, select:

Check To automatically check and adjust the selected

item.

Skip To skip the selected item and perform no

adjustments.

When using THX speakers, select Skip and make sure that

Small or Small x2 is selected in Speaker Set (page 67) and

that 80Hz (THX) is selected in Cross Over (page 69).

Starting the setup

TOP

EXIT

ENTER

GUI remote control

ENTER

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 361 362

Comments to this Manuals

No comments

Yamaha DSP-Z9 Owner's Manual Page 34

Comments to this Manuals

Related products and manuals for AV receivers Yamaha DSP-Z9