Yamaha R-8 Owner's Manual Page 46

  • Download
  • Add to my manuals
  • Print
  • Page
    / 128
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 45
Updating the unit’s firmware via the network
42 En
New firmware that provides additional features or product improvements will be released as needed. If the unit is
connected to the Internet, you can download the firmware via the network and update it.
y
You can also update the firmware using the USB memory device
from the “ADVANCED SETUP” menu (p.38).
1 Press SETUP.
2 Use the cursor keys to select “Network
Setup” and press ENTER.
3 Use the cursor keys to select “Information”
and press ENTER.
If new firmware is available, “NewFwAvailable”
appears on the front display.
4 Press RETURN to return the previous state.
5 Use the cursor keys to select “Update” and
press ENTER.
6 To start the firmware update, press ENTER.
The unit to restart and the firmware update starts.
y
To cancel the operation without updating the firmware, press
SETUP.
7 If “UPDATE SUCCESS” appears on the front
display, press A (power) on the front panel.
The firmware update is complete.
Updating the unit’s firmware via the network
Do not operate the unit or disconnect the power cable or network cable during firmware update. Firmware update takes about 20
minutes or more (depending on your Internet connection speed).
If the unit is connected to the wireless network via a wireless network adapter, network update may not be possible depending on
the condition of the wireless connection. In this case, update the firmware using the USB memory device (p.38).
Notes
SETUP
ENTER
SETUP
OPTION
RETURN
TOP
MENU
POP-UP
MENU
MUTE
ENTER
VOLUME
HOME
NOW
PLAYING
DISPLAY
Cursor keys
B
/
C
VOL.
SP A
NewFwAvailable
VOL.
SP A
PerformUpdate
Page view 45
1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 127 128

Comments to this Manuals

No comments