Yamaha R-8 Owner's Manual download pdf (Page 40)

36 En

Configuring various functions (SETUP menu)

■ Network Name

Edits the network name (the unit’s name on the network)

displayed on other network devices.

1 Select “Network Name”.

2 Press ENTER to enter the name edit display.

3 Use the cursor keys (D / E) to move the edit

position and the cursor keys (B / C) to select

a character.

4 To confirm the new name, press ENTER.

5 To exit from the menu, press SETUP.

■ Update

Updates the firmware via the network.

Sets the maximum volume to prevent excessive loudness.

Setting range

-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB

Default

+16.5 dB

Sets the initial volume when the receiver is turned on.

Sets the amount of time for the auto-standby function. If

you do not operate the unit for the specified time, the unit

will automatically go into standby mode.

Just before the unit enters standby mode, “AutoPowerStdby”

appears and then countdown starts in the front display.

Enables/disables the eco (power saving) mode.

When the eco mode is enabled, you can reduce the unit’s

power consumption.

• Be sure to press ENTER to restart the unit after selecting a

setting. The new setting will take effect after the unit is

restarted.

• When “ECO Mode” is set to “On”, the front display may

become dark.

• If you want to play audio at high volume, set “ECO Mode” to

“Off”.

Configures the DC OUT jack setting.

Power Mode

Selects how to supply power to the Yamaha AV accessory

connected to the DC OUT jack.

Perform

Update

Starts the process to update the unit’s firmware.

For details, see “Updating the unit’s firmware via

the network” (p.42).

Version

Displays the version of the firmware installed on

the unit.

ID Displays the system ID number.

Max Volume

VOL.

SP A

NetworkName

VOL.

SP A

R-N500XXXXXX

Network name

VOL.

SP A

R-N500XXXXXX

Initial Volume

Off (default)

Sets the level to the volume level of the unit

when it last entered standby mode.

Mute Sets the unit to mute the audio output.

-80.0 dB to

+16.5 dB (0.5 dB

increments)

Sets the level to the specified volume level.

AutoPowerStdby

Off (default)

Does not set the unit to standby mode

automatically.

2 hours,

4hours,

8hours,

12 hours

Sets the unit to standby mode when you have not

operated the unit for the specified time. For

example, when “2 hours” is selected, the unit will

switch to standby mode if you do not operate it for

2 hours.

ECO Mode

Off (default) Disables the eco mode.

On Enables the eco mode.

Notes

DC OUT

Cont

(default)

Supplies power through the DC OUT jack

continuously regardless of the power state (on/

standby) of the unit.

Sync

Supplies power through the DC OUT jack only

when the unit is turned on.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 127 128

Comments to this Manuals

No comments

Yamaha R-8 Owner's Manual Page 40

Comments to this Manuals

Related products and manuals for Tuner Yamaha R-8