Yamaha MY8 Owner's Manual download pdf (Page 4)

4 MY8-LAKE Owner’s Manual

PRECAUTIONS

PLEASE READ CAREFULLY

BEFORE PROCEEDING

* Please keep this manual in a safe

place for future reference.

WARNING

Always follow the basic precautions listed below

to avoid the possibility of serious injury or even

death from electrical shock, short-circuiting,

damages, fire or other hazards. These

precautions include, but are not limited to, the

following:

• Do not install the card in any Yamaha products not

specified by Yamaha for use with the card to avoid

possible electrical shock, fire, or equipment damage.

• Do not attempt to disassemble or modify the card. Do

not apply excessive force to card connectors or other

card components. Mishandling of the card may lead to

shock, fire hazard, or equipment failure.

• Be sure to disconnect the power cable of the host

device before installing the card and connecting/

disconnecting the cables (in order to eliminate shock

hazard, undesired noise, and avoid equipment

damage).

• Turn off all peripheral devices connected to the host

device before installation, and unplug all related cables

(in order to eliminate shock hazard, undesired noise,

and avoid equipment damage).

CAUTION

Always follow the basic precautions listed below

to avoid the possibility of physical injury to you or

others, or damage to the device or other

property. These precautions include, but are not

limited to, the following:

• Be sure to properly ground the host device to prevent

electrical shock and/or malfunction.

• Do not touch the metallic leads (pins) of the circuit

board when handling the card. The pins are sharp and

may cause hand cuts.

• Wear a pair of heavy gloves during installation to avoid

scratching or cutting your hands on sharp edges.

• Avoid touching exposed connectors and metal parts to

minimize the possibility of bad connections.

• Drain all static electricity from your clothing and body

before handling the card. Static electricity can damage

the card. Touch an exposed metal part of the host

device or other grounded object beforehand.

• Do not drop the card or subject it to physical shock as

this can result in breakage and/or malfunction.

• Do not drop screws or other small parts inside the

card. If power is applied while screws or similar metal

objects are loose inside the unit the card may

malfunction or be damaged. If you cannot retrieve

dropped objects yourself, refer the problem to qualified

Yamaha service personnel.

• The illustrations as shown in this manual are for

instructional purposes only, and may be different from

the ones on your equipment.

• Lake is a registered trademark of Lab.gruppen AB.

• Windows is a registered trademark of Microsoft

Corporation in the United States and other countries.

• The company names and product names in this manual

are the trademarks or registered trademarks of their

respective companies.

European models

Purchaser/User Information specified in EN55103-1 and

EN55103-2.

Conforms to Environments: E1, E2, E3 and E4

Yamaha cannot be held responsible for damage

caused by improper use or modifications to the

device, or data that is lost or destroyed.

1 2 3 4 5 ... 33

Comments to this Manuals

No comments

Yamaha MY8 Owner's Manual Page 4

Comments to this Manuals

Related products and manuals for Recording Equipment Yamaha MY8