Yamaha MY8 Owner's Manual download pdf (Page 19)

MY8-LAKE Owner’s Manual 19

7. Tap the [Filter Edit] button to

adjust filter gain, frequency

center point and slope.

8. Tap any of the blue boxes that

appear at the top left of the

screen to manually enter

specific values if needed.

9. If the [Frequency Lock] button at

the top left of the screen is

orange, tap the button to disable

this function.

NOTE

Frequency Lock is enabled by default

and restricts filter selection and frequency

adjustment by tapping and dragging on

the red ‘X’ filter points. When enabled, this

feature avoids accidental EQ adjustments

requiring selection of PEQ filters by

tapping on the associated filter box at the

top of the screen, and frequency

adjustment is only permitted using the EQ

filter edit tool described in step 6. For

GEQ, this feature forces the user to select

a GEQ filter by dragging the EQ selection

tool at the bottom of the screen.

10. Tap on the [GEQ2] tab at the top

of the screen.

NOTE

The EQ curve from the PEQ1 is visible on

GEQ2; the EQ overlays stack on top of

each other having a compounding effect

on the resulting EQ.

11. Tap on the associated filter point

‘X’ to select a GEQ2 filter that

overlaps the PEQ1 Mesa filter

frequency range.

12. Drag the filter point up or down

to boost/cut.

The GEQ filter affects the overall EQ

curve indicated by the white line (i.e.

the sum of all filters on all PEQ/GEQ

overlays that affect the selected

module).

HPF/LPF Screen

(Mesa mode only)

The HPF/LPF screen provides control of

high- and low-pass filters that affect the

overall EQ on the selected module. Follow

the steps below to set and adjust HPF or

LPF filters on a Mesa module.

1. Tap the [Home] button, then tap

a module icon.

2. Tap the [EQ] tab at the top of the

screen (if necessary), then tap

the [HPF/LPF] tab.

3. Tap the [HPF Enable] and the

[LPF Enable] buttons (so that

they turn orange).

“X” filter points

1 ... 18 19 20 ... 33

Comments to this Manuals

No comments