Yamaha MY8 Owner's Manual download pdf (Page 13)

MY8-LAKE Owner’s Manual 13

card. The post-crossover signals can be

routed back to the host or out to the AES/

EBU connector. In case of routing back to

the host, patch the corresponding channels

of the SLOT to the Insert In of any empty

output channels. If any input channels are

available instead, you can also patch to the

input ports and directly output the signals

via Direct Out.

NOTE

For details about the console settings, refer to

the owner’s manual supplied with your host

device.

Starting the Lake

Controller

To start the Lake Controller with an online

MY8-LAKE card connected for the first time,

follow the steps below.

1. Double-tap (click) the Lake

Controller icon on the Windows

desktop.

2. If the Select Network Adapter

dialog appears, select the

relevant network adapter for the

MY8-LAKE connection from the

list and tap [Select Adapter].

3. Tap [No] if prompted to recall the

last system configuration.

NOTE

•

After a proper network configuration

and a valid Network connection are

established, your MY8-LAKE card is

now online and can be controlled using

the Lake Controller software.

• Ensure that the Lake Controller is

allowed full access through the

Windows firewall.

Placing Modules

The default configuration for the MY8-LAKE

is eight Mesa EQ modules, providing a total

of eight discrete module inputs and outputs.

For instructions on changing the

configuration, refer to “Changing the MY8-

LAKE Frame Configuration” on page 21.

1. Tap the [Modules] button from

the main Home screen to call up

the module scroll bar.

Modules button

1 ... 12 13 14 ... 33

Comments to this Manuals

No comments