Yamaha MY8 Owner's Manual download pdf (Page 17)

MY8-LAKE Owner’s Manual 17

NOTE

The Levels screen always displays active

RMS & Peak metering for the input and

output channels on the selected module.

The fader positions and associated

values change as each level type is

selected (Gain, Delay, LimiterMax etc.).

4. Tap the [LimiterMax] button to

display a submenu containing

additional options for RMS and

peak limiter controls.

NOTE

•

The MaxRMS Level, MaxRMS Corner,

MaxRMS Attack, MaxRMS Release and

MaxPeak Level controls can be used to

set independent peak and RMS output

limiters as required for your application.

• These limiter levels are specified in dB

units. Yamaha presets for Installation

series loudspeakers are tuned

assuming 26 dB amp gain, and the

“Analog Output Reference” in the I/O

Config screen is set to +24 dBu by

default for the MY8-LAKE (which is the

case for most of Yamaha consoles).

However, the limiter levels should be

adjusted according to the specific

output devices, amplifiers and your

particular applications. For use with +18

dBu maximum output devices such as

DM2000, for example, you will need to

change the setting of the Analog Output

Reference.

5. Tap the [LimiterMax EXIT] button

to return to the top level menu.

6. To change polarity, tap the

[Enable Polarity] button, then tap

a polarity button (located to

the right of the associated

channel’s mute button).

7. To label a channel, tap the [Label

Channel] button, then tap a

channel label button. Enter a

new name, then tap [OK] (or

press <Enter>).

NOTE

•

The mute status text is removed from

the mute button and mute functionality

is temporarily disabled.

• The channel number is appended

automatically and does not need to be

included in the text label.

8. Tap the [Label Channel] button

again to exit channel labeling

and enable mute functionality

again.

NOTE

The Meter Options submenu includes

various other metering options and

functionality, some requiring Designer

Mode activation before the functions are

displayed. For further information on

Designer Mode and more detailed Levels

screen functionality, refer to the Lake

Controller Operation Manual.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 32 33

Comments to this Manuals

No comments