Yamaha NX-N500 Owner's Manual download pdf (Page 35)

34 En

APPENDIX

Bluetooth

Remote control

Problem Cause Remedy

See

page

Cannot make the unit paired

with the Bluetooth device.

Wireless switch is set to “OFF”. Set it to “AUTO”. 7

The device does not support A2DP. Perform paring operations with a device which

supports A2DP.

—

The unit and device are too far apart. Position the Bluetooth device so that it is less than

10 m (33 ft) from this unit and pair the device with

this unit.

—

There is a device (microwave oven, wireless LAN,

etc.) outputs signals in the 2.4 GHz frequency band

nearby.

Move this unit away from the device that is

emitting radio frequency signals. —

Another Bluetooth device is connected. Disconnect current Bluetooth connection, and

perform pairing with the new device.

Bluetooth is not selected as the input source. Select Bluetooth as the input source. 8

A Bluetooth adaptor, etc. that you want to pair with

the unit has a password other than “0000”.

Use a Bluetooth adaptor, etc. whose password is

“0000”.

Cannot make a Bluetooth

connection.

Wireless switch is set to “OFF”. Set it to “AUTO”. 7

Another Bluetooth device is connected. The unit cannot make multiple Bluetooth

connections. Disconnect current Bluetooth

connection, and make connection for the desired

device.

More than 20 devices are paired and the oldest

pairing information is deleted.

Perform pairing again. This unit can be paired with

a maximum total of 20 Bluetooth devices for

reception and transmission. When the 21st device

is registered, the least frequently used pairing

information is deleted.

No sound is produced or the

sound is intermittent during

playback.

The Bluetooth connection of the unit with the

device is disconnected.

Perform Bluetooth connection operations again.

The unit and device are too far apart. Move the Bluetooth device so that it is less than

10 m (33 ft) from this unit.

—

There is a device (microwave oven, wireless LAN,

etc.) outputs signals in the 2.4 GHz frequency band

nearby.

Move this unit away from the device that is

emitting radio frequency signals. —

The device’s Bluetooth function is off. Enable the Bluetooth function of the device. —

The device’s volume is set to minimum. Turn up the volume level on the device. —

Problem Cause Remedy

See

page

The remote control does not

work and/or function

properly.

The wrong distance or angle. The remote control functions within a maximum

range of 6 m (20 ft) and no more than 30 degrees

off-axis from the front panel.

Direct sunlight or lighting (from an inverter type of

fluorescent lamp, etc.) is striking the remote

control sensor of this unit.

Reposition this unit.

—

The batteries are weak. Replace all batteries. 8

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 308 309

Comments to this Manuals

No comments

Yamaha NX-N500 Owner's Manual Page 35

Comments to this Manuals

Related products and manuals for Portable speakers Yamaha NX-N500