Yamaha RAPTOR 250 Service Manual Page 269

  • Download
  • Add to my manuals
  • Print
  • Page
    / 311
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 268
ELEC
7-2
1
2
3
4
5
6
7
8
EBS01028
CHECKING SWITCH CONTINUITY
Check each switch for continuity with the
pocket tester. If the continuity reading is incor-
rect, check the wiring connections and if nec-
essary, replace the switch.
CAUTION:
Never insert the tester probes into the cou-
pler terminal slots . Always insert the
probes from the opposite end of the cou-
pler, taking care not to loosen or damage
the leads.
N
O
TE:N
O
TE:
Before checking for continuity, set the pocket
tester to “0” and to the “
× 1” range.
When checking for continuity, switch back and
forth between the switch positions a few
times.
The terminal connections for switches (e.g.,
main switch, engine stop switch) are shown in
an illustration similar to the one on the left.
The switch positions are shown in the far
left column and the switch lead colors are
shown in the top row in the switch illustration.
N
O
TE:N
O
TE:
” indicates a continuity of electricity
between switch terminals (i.e., a closed circuit
at the respective switch position).
The example illustration on the left shows
that:
There is continuity between the switch termi-
nals for the red and brown switch leads and
between the switch terminals for the red/white
and brown/blue switch leads when the switch
is set to “ON”.
Pocket tester
90890-03112
Analog pocket tester
YU-03112-C
CHECKING SWITCH CONTINUITY
Page view 268
1 2 ... 264 265 266 267 268 269 270 271 272 273 274 ... 310 311

Comments to this Manuals

No comments