Yamaha F40F Owner's Manual download pdf (Page 56)

Operation

make sure there is no hesitation in their

travel. Operation should be smooth over

the complete range of motion, and each le-

ver should return completely to the idle po-

sition.

 Look for loose or damaged connections of

the throttle and shift cables.

EMU36483

Engine shut-off cord (lanyard)

Inspect the engine shut-off cord and clip for

damage, such as cuts, breaks, and wear.

EMU40993

Engine oil

1. Place the outboard motor in a vertical

position (not tilted). NOTICE: If the out-

board motor is not level, the oil level

indicated on the oil dipstick may not

be accurate.

[ECM01861]

2. Remove the oil dipstick and wipe it

clean.

3. Insert the oil dipstick completely and re-

move it again.

4. Check that the oil level on the oil dipstick

is between the upper and lower marks.

Consult your Yamaha dealer if the oil

level is not at the proper level or if it ap-

pears milky or dirty.

1. Cord

2. Clip

3. Engine shut-off switch

1. Cord

2. Clip

3. Engine shut-off switch

1. Oil dipstick

1. Lower mark

2. Oil dipstick

3. Upper mark

ZMU06400

132

ZMU05091

6BG-9-39-1E0.book 50 ページ２０１３年４月２９日　月曜日　午前９時４１分

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 111 112

Comments to this Manuals

No comments

Yamaha F40F Owner's Manual Page 56

Comments to this Manuals

Related products and manuals for Motor vehicle accessories & components Yamaha F40F