Yamaha NX-E100 Owner's Manual download pdf (Page 3)

• Place the speakers on a sturdy, vibration-free surface.

You may not be able to obtain good bass quality when

the speakers are placed directly on the floor. Put a

block, etc. under the speakers.

• Better stereo images will be obtained when the

speakers are slightly angled in towards the listening

position.

The front cover is fastened to the enclosure at four points,

and can be removed if desired. To remove the cover, hold

on to both sides of the cover and slowly pull straight

away from the speaker.

To reattach, line up the four pegs on the inside surface of

the cover with the four corresponding holes on the

speaker and push gently.

REMOVING THE FRONT COVER

Type ............................ 2-way bass-reflex speaker system

(Magnetically-shielded type)

Driver................................................. 13 cm cone woofer

2.5 cm dome tweeter

Impedance............................................................. 6 ohms

Frequency response .................. 55 Hz - 28 kHz (–10 dB)

Nominal Input Power ............................................... 60W

Maximum Input Power ........................................... 110W

Sound pressure level ............................... 87 dB/2.83 V.m

Crossover Frequency .............................3 kHz 12 dB/oct.

Dimensions (W x H x D) ................. 186 x 300 x 222 mm

(7-5/16” x 11-13/16” x 8-3/4”)

Weight .......................................... 4 kg (8 lbs. 13 oz.) x 2

Accessory ................................... Speaker cable (4 m) x 2

* Specifications subject to change without notice due to

product improvements.

* Care should be taken not to exceed the input power

values noted above.

SPECIFICATIONS

Note

When the cover is removed, take care not to

touch the speaker units with your hands or to

exert excessive force with tools.

PLACING THE SPEAKERS

1 2 3 4

No comments

Yamaha NX-E100 Owner's Manual Page 3