Yamaha F6 Owner's Manual download pdf (Page 68)

Maintenance

4. Remove the oil level plug and gasket to

allow the oil to drain completely.

NOTICE: Check the used oil after it

has been drained. If the oil is milky or

contains a large amount of metal par-

ticles, the gear case may be damaged.

Have a Yamaha dealer check and re-

pair the outboard motor.

[ECM00712]

IP:

For disposal of used oil, consult your Yamaha

dealer.

5. Using a flexible or pressurized filling de-

vice, inject the gear oil into the gear oil

drain screw hole.

6. Put a new gasket on the oil level plug.

When the oil begins to flow out of the oil

level plug hole, insert and tighten the oil

level plug.

7. Put a new gasket on the gear oil drain

screw. Insert and tighten the gear oil

drain screw.

EMU39331

Inspecting and replacing anode (ex-

ternal)

Yamaha outboard motors are protected from

corrosion by sacrificial anode. Inspect the ex-

ternal anode periodically. Remove scales

from the surface of the anode. Consult a

Yamaha dealer for replacement of the exter-

nal anode.

NOTICE

ECM00720

Do not paint anodes, as this would render

them ineffective.

1. Gear oil drain screw

2. Oil level plug

Recommended gear oil:

Hypoid gear oil SAE#90

Gear oil quantity:

0.100 L (0.106 US qt, 0.088 Imp.qt)

ZMU06779

ZMU06780

Tightening torque:

9.0 Nm (0.92 kgf-m, 6.6 ft-lb)

Tightening torque:

9.0 Nm (0.92 kgf-m, 6.6 ft-lb)

1. Anode

ZMU06781

U6BV10E0.book Page 63 Friday, July 17, 2009 2:29 PM

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 79 80

Comments to this Manuals

No comments

Yamaha F6 Owner's Manual Page 68

Comments to this Manuals

Related products and manuals for Engine Yamaha F6