
Operation
44
3. To prevent steering movement, turn the
steering friction adjuster clockwise.
4. Tighten the air vent screw.
5. When using a portable fuel tank, discon-
nect the fuel hose, and then install the
fuel joint cap. WARNING! When not us-
ing a portable fuel tank, make sure to
install the fuel joint cap. Otherwise, in-
jury could result from striking the fuel
joint accidentally.
[EWM02411]
6. Hold the rear of the top cowling and fully
tilt the outboard motor up. Slightly lower
the outboard motor from the fully tilted up
position and fit the tilt support bar secure-
ly into the holder located on the clamp
bracket.
EMU39571
Procedure for tilting down
1. Slightly tilt the outboard motor up.
2. Slowly tilt the outboard motor down while
pulling the tilt support bar up.
1. Neutral position
1. Steering friction adjuster
1. Air vent screw
1
ZMU06749
ZMU06827
1
ZMU06751
1
1. Fuel hose
2. Fuel joint cap
1. Tilt support bar
2. Holder
ZMU06753
2
1
ZMU06829
1
2
U6BV10E0.book Page 44 Friday, July 17, 2009 2:29 PM
Comments to this Manuals