Yamaha F6 Owner's Manual download pdf (Page 40)

Operation

2. Align the fuel cock with the built-in fuel

tank position.

3. Remove the top cowling, and then

squeeze the primer pump in the bottom

cowling repeatedly until you feel it be-

come slightly firm.

4. Install the top cowling.

Sending fuel for portable fuel tank (optional)

1. Loosen the air vent screw on the portable

fuel tank by 2 or 3 turns.

2. If there is fuel in the built-in fuel tank, loos-

en the air vent screw by 1 or 2 turns to

prevent pressure from increasing inside

the tank due to fuel expansion.

3. Remove the fuel joint cap. Connect the

fuel hose securely between the tank and

the outboard motor so that the primer

pump arrow is pointing toward the out-

board motor.

1. Air vent screw

1. Built-in fuel tank position

1. Primer pump

ZMU06740

ZMU06720

ZMU06826

1. Air vent screw

ZMU06740

U6BV10E0.book Page 35 Friday, July 17, 2009 2:29 PM

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 79 80

No comments

Yamaha F6 Owner's Manual Page 40