Yamaha F6 Owner's Manual download pdf (Page 36)

Operation

EMU36483

Engine shut-off cord (lanyard)

Inspect the engine shut-off cord and clip for

damage, such as cuts, breaks, and wear.

EMU39383

Engine oil

1. Place the outboard motor in an upright

position (not tilted). NOTICE: If the mo-

tor is not level, the oil level indicated

on the dipstick may not be accurate.

[ECM01790]

2. Remove the oil filler cap and wipe the at-

tached oil dipstick clean.

IP:

The oil lubrication check window does not in-

dicate the engine oil level. Use the oil lubrica-

tion check window to make sure that the

engine is being lubricated with oil while it is

running.

3. Install the oil filler cap and tighten it com-

pletely.

4. Remove the oil filler cap again and check

that the oil level on the dipstick is be-

tween the upper and lower marks. If the

oil level is not at the proper level, add or

extract oil until the oil is between the up-

per and lower marks.

5. Install the oil filler cap and tighten it com-

pletely.

1. Clip

2. Cord

ZMU06874

ZMU06873

1. Oil filler cap

2. Oil lubrication check window

1. Oil dipstick

2. Upper mark

3. Lower mark

ZMU06769

ZMU06737

U6BV10E0.book Page 31 Friday, July 17, 2009 2:29 PM

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 79 80

No comments

Yamaha F6 Owner's Manual Page 36