Yamaha DPX-830 Owner's Manual Page 42

  • Download
  • Add to my manuals
  • Print
  • Page
    / 45
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 41
38
This projector has two indicators, each of which shows the operation condition of the projector.
Refer to Troubleshooting for additional indication signals.
Normal conditions
Abnormal conditions
*1: When LAMP MODE of the SETUP menu is set to CINEMA.
*2: When LAMP MODE is set to STANDARD, this duration will be decreased to 2000 hours.
POWER STATUS CONDITION NOTE
Steady red Off
Stand-by.
Steady green Blinking green
Warming up period (about 1 minute).
The STANDBY/ON button cannot be used
until the STATUS indicator is steady green.
Steady green Steady green
The projector is ready.
Steady red Blinking green
Cooling down period (lasts under 2 minutes; normal when
shutting down).
Do not unplug the projector until the
STATUS indicator is off.
POWER STATUS CONDITION SOLUTION
Steady green
or
Steady red
Blinking orange
Abnormal temperature
The ventilation grilles are clogged with dust or dirt.
The room temperature is high.
Clean the ventilation grilles.
Relocate the projector to a cooler place.
Remove any objects blocking the
ventilation grilles.
Steady red Blinking green
Abnormal when it occurs except while shutting down. The
protection circuit is working or the lamp is in an abnormal
condition.
Wait until the STATUS indicator goes out,
then press the STANDBY/ON button.
If the above solution is not effective,
replace the lamp.
Steady green Blinking green/red
Lamp operation time warning. (Total lamp operation time
reached 2250 hours
*1
while the power was on.)
Replace the lamp.
Change with a new lamp if this problem
recurs.
Steady red Blinking red
Lamp operation time warning. (Total lamp operation time
reached 2250 hours
*1
while the power was off.)
Steady red Steady red
Lamp operation time warning. (Total lamp operation time
reached 3000 hours
*1, *2
while the power was off.)
Blinking
green/red
Off
The lamp cover isn’t closed. Close the cover correctly.
Blinking
green/red
Steady or Blinking
Abnormal. Contact your dealer.
STATUS indicator
POWER indicator
STANDBY/ON button
Indicators
14
Page view 41
1 2 ... 37 38 39 40 41 42 43 44 45

Comments to this Manuals

No comments