Yamaha DPX-830 Owner's Manual download pdf (Page 33)

◆ Adjusting color (SATURATION and HUE)

You can adjust the color of the projected image using the menu (see page 23).

1. Display the IMAGE menu.

2. Select SATURATION or HUE by pressing the or button.

3. Adjust the selected item by pressing the or button.

To exit from the menu:

4. Press the MENU button several times.

SATURATION

Use to adjust the richness of the color in the projected image. Increase this figure by pressing the button to render a richer color or decrease

this figure by pressing the button to render a lighter color.

• Unavailable when the input source is HDMI or D-SUB source is an RGB signal.

HUE

Use to adjust the tint of the projected image. Increase this figure by pressing the button to render a greenish image or decrease this figure by

pressing the button to render a reddish image.

• Available only when the VIDEO or S-VIDEO source is NTSC or 4.43NTSC signal.

◆ Sharpening or softening images (SHARPNESS)

You can adjust the sharpness of the projected image using the menu (see page 23).

1. Display the IMAGE menu.

2. Select SHARPNESS by pressing the or button.

3. Adjust the selected item by pressing the or button.

• Increase this figure by pressing the button to render a sharper image, or reduce it by pressing the button to give a softer image with less

image noise.

To exit from the menu:

4. Press the MENU button several times.

◆ LPF (Progressive filter)

You can select whether or not to enable the LPF. This item is normally set to OFF.

Vertical or horizontal streak noise may appear on the projected image depending on the type of the DVD player you use. In such cases, you can

reduce such streak noise by enabling the LPF. However, projected images become softened slightly.

1. Select A/D SETTING in the SIGNAL menu.

2. Press the or button to select EXECUTE .

3. Press the ENTER button.

4. Press the or button to select LPF.

5. Press the or button to choose ON or OFF.

To exit from the menu:

6. Press the MENU button several times.

EXECUTE

OFF

CLAMP

POSITION

CLAMP WIDTH

LPF

CLAMP WIDTH

OFF

VERT. SYNC

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 44 45

Comments to this Manuals

No comments

Yamaha DPX-830 Owner's Manual Page 33

Comments to this Manuals

Related products and manuals for Data projectors Yamaha DPX-830