Yamaha R-N602 Owner's Manual Page 20
- Page / 66
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
16 En
Connecting to network
You can easily setup a wireless connection by applying the
connection settings on iOS devices (iPhone/iPod touch).
Before proceeding, confirm that your iOS device is
connected to a wireless router (access point).
1 Press A to turn on this unit.
2 Press SETUP.
3 Use the cursor keys (B / C) to select
“Network” and press ENTER.
y
To return to the previous state, press RETURN.
4 Use the cursor keys (B / C) to select
“Connection” and press ENTER.
5 Use the cursor keys (B / C) to select
“Wireless” and press ENTER.
6 Use the cursor keys (B / C) to select “Share
Setting” and press ENTER.
7 Use the cursor keys (B / C) to select the
desired connection method and press
ENTER.
The following connection methods are available.
When you select “Wireless (WAC)” as the connection method, all
network settings are initialized.
■ Sharing the iOS device setting wirelessly
If you select “Wireless (WAC)” as the connection method,
perform the network setting sharing operation on your iOS
device. (The following procedure is a setup example for
iOS 8.)
1 On the iOS device, select the unit as the
AirPlay speaker in the Wi-Fi screen.
2 Check the network currently selected and tap
“Next”.
When the sharing process finishes, the unit is
automatically connected to the selected network
(access point).
When the setting finishes, verify whether the unit is
connected to a wireless network (p. 20).
Sharing the iOS device setting
If the network connection is not set, when you turn on
this unit, “WAC” (Wireless Accessory Configuration)
appears on the front display, and the iOS device setting
can be shared.
To share the iOS device setting, perform the network
setting sharing operation on your iOS device.
R-N602 XXXXXX
WAC
PRESET
MEMORY
SETUP
HOME
MUTENOW PLAYING
VOLUME
RETURN
ENTER
OPTION
RETURN
SETUP
ENTER
Cursor keys
B
/
C
WPS
WIRELESS
Wireless(WAC)
SHARE
Wireless
(WAC)
You can apply the connection settings on the iOS
device to the unit using a wireless connection. For
details, see “Sharing the iOS device setting
wirelessly”. (You need iOS device with iOS 7 or
later.)
USB
Cable
You can apply the connection settings on the iOS
device to the unit using a USB cable. For details, see
“Sharing the iOS device setting using a USB cable”.
(You need iOS device with iOS 5 or later.)
Note
The name of this unit
Tap here to start setup
The network currently
selected
- Network Receiver 1
- ■ For U.K. customers 3
- Contents 5
- INTRODUCTION 6
- Supplied accessories 8
- Controls and functions 9
- NIHGED J KLMF 10
- Front display 11
- Rear panel 12
- Remote control 13
- ■ Installing batteries 14
- ■ Operation range 14
- Connections 15
- ■ Connecting via banana plug 16
- ■ Bi-wire connection 16
- ■ Connecting speaker cables 16
- PREPARATION 17
- Connecting the network cable 18
- Preparing a wireless antenna 18
- Connecting power cable 18
- Connecting to network 19
- R-N602 XXXXXX 20
- Wireless(WAC) 20
- USB cable 21
- WPA2-PSK(AES) 22
- Cursor keys 24
- (Pure Direct) 25
- BASS TREBLE 26
- VOLUMELOUDNESS 26
- VOLUME +/– 26
- Sleep 120min 27
- FM 98.50MHz 28
- Auto Preset 29
- 01:FM 87.50MHz 29
- 01:FM 98.50MHz 29
- 02:Empty 29
- Clear Preset 30
- 01:Cleard 30
- Program Type 31
- CLASSICS 31
- TP FM101.30MHz 31
- Connected 32
- Disconnecting a Bluetooth 33
- This unit 34
- Playback keys 35
- B / C / D / E 35
- ■ Repeat/shuffle settings 36
- Bookmarks 37
- 3 Access the vTuner website 38
- Check this box 40
- Track #1 43
- Track #1 45
- 01:Empty 46
- ■ Volume Trim 47
- ■ Signal Info 47
- Max Volume 48
- ■ Connection 49
- ■ Information 49
- ■ IP Address 49
- ■ DMC Control 49
- ■ Standby (Network Standby) 49
- Network Name 50
- Initial Volume 51
- AutoPowerStdby 51
- (Auto Power Standby) 51
- ECO Mode 51
- SP IMP.••8¬MIN 52
- REMOTE ID•AUTO 52
- INIT••••CANCEL 52
- ■ Firmware update procedure 53
- Available 54
- Perform Update 54
- ■ General 55
- Troubleshooting 56
- ADDITIONAL 57
- INFORMATION 57
- ■ Bluetooth 58
- ■ USB and network 59
- ■ Remote control 60
- Trademarks 62
- Specifications 63
Related products and manuals for Car media receivers Yamaha R-N602
Car media receivers Yamaha R-N500 Manual
(120 pages)
(120 pages)
Car media receivers Yamaha R-N803 Owner's Manual
(216 pages)
(216 pages)
(76 pages)
Car media receivers Yamaha R-N602 Owner's Manual
(507 pages)
(507 pages)
Car media receivers Yamaha R-N602 Owner's Manual
(130 pages)
(130 pages)
© 2020, manymanuals.com. All rights reserved. | 0.351 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals