Yamaha MCR-940 Owner's Manual Page 50

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 49
48 En
TROUBLESHOOTING
iPod
Note
If a transmission error occurs but no status message is displayed on the front panel display of the receiver, check the connection between
the receiver and your iPod (p.10).
Status message Cause Remedy
See
page
CONNECT ERR
There is a problem with the signal path
from your iPod to the receiver.
Turn off the receiver and try resetting your iPod.
10
UNKNOWN TYP
The iPod being used is not supported by
the receiver.
Only iPod (Click and Wheel), iPod nano, iPod
Classic, iPod mini and iPod touch are supported.
CONNECTED
Your iPod is properly stationed in the
iPod dock, and the connection between
your iPod and the receiver is complete.
NOT CONNECT
Your iPod was removed from the iPod
dock of the receiver.
Station your iPod back to the terminal of the receiver.
10
CAN'T PLAY
The receiver cannot play back the songs
currently stored on your iPod.
Check that the songs currently stored on your iPod
are playable.
Store some other playable music files on your iPod.
Remote control
Problem Cause Remedy
See
page
The remote control
does not work nor
function properly.
The remote control may be operated
outside its operation range.
For information on the remote control operation
range, see Using the remote control”.
11
The remote control sensor on this system
may be exposed to direct sunlight or
lightening (invented fluorescent lamps).
Change the lighting or orientation of this system.
11
The battery may be worn out. Replace the battery with new one.
11
There are obstacles between the sensor of
this system and the remote control.
Remove the obstacles.
11
The system control cable is disconnected
from the system connector jack of the
receiver and/or the BD player.
Connect the receiver and the BD player securely with
the system control cable.
8
BD player (BD-940)
Problem Cause Remedy
See
page
Power does not turn
on.
The plug is not completely inserted. Connect the power cable firmly.
8
The receiver and the BD player are
connected incorrectly.
Check the connection with the receiver.
8
The receiver is set incorrectly. Check the setting (INPUT/Volume/MUTE/
Headphone) of the receiver.
Power is turned off. “Auto Power Off” is set to “Yes”. Set “Auto Power Off” to “No”.
39
Page view 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 59 60

Comments to this Manuals

No comments