Yamaha MCR-940 Owner's Manual Page 50

  • Download
  • Add to my manuals
  • Print
  • Page
    / 444
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 49
46 En
TROUBLESHOOTING
The following messages appear on the TV screen in case the disc you tried to playback is not appropriate or the operation
is not correct.
Network
Problem Cause Remedy
See
page
Cannot connect to
the Internet.
The network cable is not connected
properly.
Connect the network cable properly.
10
The wrong cable is being used, such as a
modular cable.
Use the network cable for connection.
10
The broadband router or modem is not
properly connected.
Connect the broadband router and/or modem
properly.
10
The broadband router or modem is not
turned on.
Turn on the broadband router or modem.
The network settings are not correct. Check “Communication Setup”.
36
Cannot download
BD-LIVE contents.
The network cable is not connected
properly.
Connect the network cable properly.
10
The USB memory device is not
connected properly.
Check that the USB memory device is connected to
the USB BD STORAGE/SERVICE terminal of the
BD player.
10
The BD disc does not support BD-LIVE. Check if the BD disc supports BD-LIVE.
24
“BD Internet Access” is set to “Prohibit”. Set “BD Internet Access” to “Permit” or “Limit”.
35
Messages Relating to BD disc and DVD disc
Error message Possible Error Remedy
Cannot play. The disc cannot be played back with this Player. Check the disc, and load it correctly.
Incompatible disc. If you load a disc which cannot be played with this
Player (i.e. a scratched disc), or if you load a disc
upside down, this message will appear, and the disc
tray will automatically pop out.
Check the disc, and load it correctly.
Occurs if the loaded disc cannot be played because it
is a non-standard disc or scratched, etc.
Remove the disc.
Cannot operate. Occurs if an operation is incorrect.
This USB memory is
not formatted properly.
Please format the
memory in USB
memory management.
Occurs if there is a formatting error. Format the USB memory again.
Occurs if the USB memory is not formatted with
FAT 32/16.
Format the USB memory with your PC.
The Connected USB
Memory cannot be
used. It should be
compliant with USB 2.0
Occurs if USB memory not compliant with USB 2.0
High Speed (480Mbit/s) is used (i.e. USB 1.0/USB
1.1).
Connect USB 2.0 High Speed (480Mbit/s) compliant
USB memory.
Page view 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 443 444

Comments to this Manuals

No comments