Yamaha YHT-494 Owner's Manual download pdf (Page 46)

En 46

SETUP

Configuring the settings specific for each input source (Option menu)

■

Combining HDMI/AV1-2 input source

video and audio

Input source: HDMI1-4, AV1-2

Combines video from HDMI or AV input sources with analog/

digital audio inputs in situations such as:

– an playback device is connected with an HDMI cable but cannot

transmit audio through HDMI

– an playback device with component video output and analog

audio output (such as certain game consoles) are connected to the

system

To change assignments, select an input source (HDMI1-4 or AV1-2)

as the video input first, and then select audio input jacks in this

menu.

Set as follows according on the desired combination of audio input

jacks.

■

Displaying information on audio/video

signals

Input source: HDMI1-4, AV1-4 J1

Displays information on digital audio and video signals on the TV

screen.

Audio information

Video information

Audio In

Audio inputs Settings method

Optical digital audio

input

Select AV1 or AV4. Connect the external component

audio cable to the optical digital jack for the selected

input.

Coaxial digital audio

input

Select AV2 or AV3. Connect the external component

audio cable to the coaxial digital jack for the selected

input.

Analog audio input Select one of AV5, AV6, AUDIO1, or AUDIO2.

Connect the external component audio cable to the

audio jack for the selected input.

SL SR

Audio;;;;;;AV1

HDMI1

VOL.

Assignable audio input jacks

Inputs that change the audio source

• For details of settings, refer to “Receiving video signals from the

HDMI jack and audio signals from a jack other than HDMI”

(☞

p. 17) and “Component connections to analog audio output

devices” (☞

p. 18).

• To return audio inputs to their previous settings, display this item

again, and select the original input jack.

Signal Info

SL SR

DolbyD

FORMAT

VOL.

Menu item

Information

FORMAT Format of audio signals.

CHAN The number of input signal channels (front/surround/

LFE).

For example, if input signal channels are 3 front

channels, 2 surrounds and LFE, “3/2/0.1” is

displayed.

If a channel that cannot be expressed as the above, a

total number of channels such as “5.1ch” may be

displayed.

SAMPL The sampling frequency of analog-to-digital

conversion.

B RATE The bit rate of input signal per second.

V IN Format and resolution of video input signal.

V OUT Format and resolution of video output signal.

V.MSG

(appears only

when an error

has occurred)

Error messages about HDMI signals and components.

Error message

HDCP Error HDCP authentication failed.

Device Over The number of connected HDMI

components is over the limit.

• “No Signal” is displayed when no signals are being received, and

“---” is displayed if this unit cannot recognize the incoming

signal.

• The bit rate may vary during playback.

1 : AV5-6 or AUDIO1-2 are also available when the “Audio Return Channel”

function is on, and the source is used for the TV audio input (TVAudio).

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 90 91

Comments to this Manuals

No comments

Yamaha YHT-494 Owner's Manual Page 46

Comments to this Manuals

Related products and manuals for AV receivers Yamaha YHT-494