Yamaha YHT-494 Owner's Manual download pdf (Page 27)

En 27

CONNECTIONS

Set up the speaker parameters automatically (YPAO)

■ Warning message

W-1:PHASE The speakers displayed

are connected with the

opposite polarity.

Depending on the type of

speakers you are using

and the environment in

which you have them

installed, this message

may occur even if the

speakers are connected

correctly.

Depending on the type of

speakers, “W-1” may

display even if the

speakers are connected

correctly.

Check that the speaker

polarity + (positive), and

- (negative) are correct. If

these are connected

correctly, you can use the

speakers normally even

this message appears.

W-2:DISTANCE The speakers displayed

are separated from the

listening position by

more than 24 m, and

cannot be adjusted

correctly.

Install the speakers with

24 m of the listening

point.

W-3:LEVEL The difference each

channel is too loud or too

low, and cannot be

adjusted correctly.

Check that all speakers

are installed in the same

surroundings.

Check that the speaker

polarity + (positive), and

- (negative) are correct.

We recommend the same

speakers or speakers with

as similar specifications

as possible.

Adjust the volume of the

subwoofer.

If “W-2” or “W-3” appears, you can apply measurement results,

but they will not give optimal results. We recommend that you

resolve the problem and carry out the measurement process

again.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 90 91

Comments to this Manuals

No comments

Yamaha YHT-494 Owner's Manual Page 27

Comments to this Manuals

Related products and manuals for AV receivers Yamaha YHT-494