Yamaha CVP-609 Owner's Manual download pdf (Page 96)

CVP-609/605 Owner’s Manual

CVP-609 Assembly

CAUTION

• Assemble the unit on a hard and flat floor with ample space.

• Be careful not to confuse or misplace the parts, and be sure to

install all parts in the correct orientation. Please assemble the

unit in accordance with the sequence described here.

• Assembly should be carried out by at least two persons.

• Be sure to use only the included screws of the specified sizes.

Do not use any other screws. Use of incorrect screws can cause

damage or malfunction of the product.

• Be sure to tighten all screws upon completing assembly of each

unit.

• To disassemble the unit, reverse the assembly sequence.

Remove all parts from the package and make sure you have all

of the items.

1 Lean unit A against the wall as shown.

1 Spread a large soft cloth, such as a blanket, as shown to

protect the floor and wall surfaces.

2 Lean unit A against the wall with the key cover closed and

the keyboard side on the bottom.

CAUTION

• Be careful not to pinch your fingers.

NOTICE

• The top part of the music rest is not fixed. Support the music

rest with your hand so that the music rest will not fall.

• Do not place the main unit upside down or with the rear side

facing down.

2 Attach units B and C to unit A.

1 Align units B and A so that the protrusion fits into the hole.

2 Fix unit B to the bottom surface of unit A using two long

screws (5 x 30 mm).

Attach the parts, pressing unit B onto unit A so that the two

fit tightly together.

Have a Phillips-head (+) screwdriver of the appropriate size ready.

To prevent the key cover from accidentally opening during assembly,

press down on the key cover, making sure that the sheets (shown) remain

in place.

To prevent damage to the speaker box located at the bottom of unit A,

make sure to place unit A on the styrofoam pads. Also, make sure that the

pads do not touch the speaker box.

Bundled pedal cord

inside. The pedals are

covered with vinyl

covers when shipped

from the factory.

Remove the cover from

the damper pedal for

optimum use of the GP

Responsive Damper

Pedal effect.

4 x 10 mm screws

for the cover (2)

Power cord

5 x 18 mm short screws (10) 4 x 20 mm thin screws (3)

5 x 30 mm long screws (4) Washers (4)

Headphone hanger

4 x 10 mm

thin screws (2)

Protective pads (2)

Large soft cloth

Styrofoam

pads

NOTICE

Do not touch the speaker net.

Doing so may damage the

speaker inside.

Protective pads

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 116 117

Comments to this Manuals

No comments

Yamaha CVP-609 Owner's Manual Page 96

Comments to this Manuals

Related products and manuals for Synthesizer Yamaha CVP-609