Yamaha CVP-609 Owner's Manual download pdf (Page 87)

CVP-609/605 Owner’s Manual

Connections – Using Your Instrument with Other Devices –

Optional footswitches (Yamaha FC4 or FC5) and an optional Foot controller (Yamaha

FC7) can be connected to the [AUX PEDAL] jack. A footswitch can be used for

switching functions on and off, while a foot controller controls continuous parameter

such as volume.

 Example 1: Using a foot controller to control the volume of the

performance data played on the keyboard.

Connect the FC7 foot controller to the [AUX PEDAL] jack. With the initial factory

settings, no special setup is necessary.

 Example 2: Using a footswitch to control Song Start/Stop.

Connect a footswitch (FC4 or FC5) to the [AUX PEDAL] jack.

To assign the function to the connected pedal, select “Song Play/Pause” in the operation

display: [Menu] → [Assignable] → [Pedal].

To the [MIC./LINE IN] jack (standard 1/4" phone jack), you can connect a microphone,

guitar, or other various equipment. For instructions on connecting a microphone, refer

to page 71.

Note that you need to select “MIC” or “LINE IN” depending on the connected

equipment. When the output level of the connected equipment (such as a microphone,

guitar, bass) is low, set the [MIC. LINE] switch to “MIC.” When the output level of the

connected equipment (such as a synthesizer, keyboard, CD player) is high, set the [MIC.

LINE] switch to “LINE.”

Connecting a Footswitch/Foot Controller ([AUX

PEDAL] jack)

NOTE

Do not connect or disconnect

the pedal when the power is

on.

Connecting a Microphone or Guitar ([MIC./LINE

IN] jack)

Foot Pedals

Footswitch FC4

(optional)

Footswitch FC5

(optional)

Foot Controller FC7

(optional)

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 116 117

No comments

Yamaha CVP-609 Owner's Manual Page 87