Yamaha NS-SW500 Owner's Manual download pdf (Page 6)

3 En

Choose one of the following connection methods most suitable for your audio system.

Choose this method if your amplifier has line output (pin jack) terminal(s).

( this page)

Choose this method if your amplifier has no line output (pin jack)

terminals. ( page 4)

Notes

• Unplug the subwoofer and other audio/video components before making connections, and do

not plug them in until all connections are completed.

• Connecting methods and terminal names on your component (such as an amplifier or receiver)

may be different from those used in this book. Please refer to the owner’s manual that came

with your component.

• All connections must be correct, that is to say L (left) to L; R (right) to R; “+” to “+” and “–” to “–”.

Audio signals input from the /MONO and INPUT 2 terminals on the subwoofer will not be output from the OUTPUT (TO SPEAKERS) terminals.

Example: Connecting one subwoofer

Use a commercially-available Mono pin cable 1 or a commercially-available Audio

pin cable 2 to make the connections.

• Connect the SUBWOOFER (or LOW PASS, etc.) terminal on the rear of the amplifier

(or AV receiver) to the /MONO INPUT2 terminal of the subwoofer using a

commercially-available Mono pin cable 1.

Alternatively,

•

When connecting the subwoofer to the SPLIT SUBWOOFER terminals (

featuring L and

R channels) on the rear panel of the amplifier, use a commercially-available Audio pin

cable 2 to connect the

/MONO INPUT2 terminal to the “L” side, and the

INPUT2 terminal to the “R” side of the SPLIT SUBWOOFER terminals.

Example: Connecting two subwoofers

Connecting to the INPUT3 (LFE) terminal(s)

If your amplifier can cut off high frequencies from

signals sent to the subwoofer, connect the amplifier to

the subwoofer’s INPUT3 (LFE) terminal(s). This will

promote higher sound quality because the signal routing

in the subwoofer is shortened by passing the built-in

HIGH CUT circuit.

CONNECTIONS

Connecting to line output (pin jack) terminal(s) of the amplifier

Subwoofer

To AC outlet

2 Audio pin cable

Amplifier or

receiver

1 Mono pin cable

Amplifier or

receiver

To AC outlet To AC outlet

Subwoofer

1 Mono pin cable

Subwoofer

1 Mono pin cable

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Yamaha NS-SW500 Owner's Manual Page 6

Comments to this Manuals

Related products and manuals for Subwoofers Yamaha NS-SW500