Yamaha NS-SW500 Owner's Manual download pdf (Page 5)

2 En

English

1 Indicator

2 Port

Outputs super-bass sound.

3 OUTPUT (TO SPEAKERS) terminals ( page 3)

Can be used for connecting to the main speakers.

Signals from the INPUT1 terminals are sent to these

terminals.

4 INPUT2 (NORMAL) terminals ( page 3)

Used to input line level signals from the amplifier.

5 INPUT3 (LFE) terminals ( page 3)

The HIGH CUT control ! has no effect on the signals

input to these terminals.

6 SYSTEM CONNECTOR jack ( page 5)

Connect the supplied system control cable here. If you

use the system control cable to connect a subwoofer to

a Yamaha component (that features a system connector

jack), turning on or off the power to the connected

component automatically turns the subwoofer on or

off.

7 INPUT1 (FROM AMPLIFIER) terminals

( page 4)

Used to connect the subwoofer with the speaker

terminals of the amplifier.

8 AUTO STANDBY (HIGH/LOW/OFF) switch

( page 5)

This switch is originally set to the OFF position. By

setting this switch to the HIGH or LOW position, the

subwoofer’s automatic power-switching function

operates. If you do not need this function, leave this

switch in the OFF position.

Note

Be sure to set the POWER switch to OFF before you set

the AUTO STANDBY switch.

9 PHASE switch ( page 6)

This switch is to be set to the REV (reverse) position.

However, depending on your speaker system or listening

conditions, there may be a case when better sound quality

is obtained by setting this switch to the NORM (normal)

position. Select the best position by ear.

) B.A.S.S. (Bass Action Selector System) switch

( page 6)

When this switch is set to

MUSIC, the bass sound in

audio software is well

reproduced. When the switch is set to MOVIE, the bass

sound in video software is well reproduced.

! HIGH CUT control ( page 6)

Adjusts the high frequency cut off point.

Frequencies higher than

the frequency selected by

this control are all cut off

(and not output).

@ VOLUME control

Adjusts the volume level. Turn the control clockwise to

increase the volume, and counterclockwise to decrease

the volume.

# POWER switch

During normal usage, set this switch to ON. If you plan

not to use the subwoofer for a long period of time, set the

switch to OFF.

CONTROLS AND THEIR FUNCTIONS

Front

panel

Rear panel

Top panel

)

798

Green:

Red:

Off:

The subwoofer is turned on.

The Automatic power-switching function

has activated, and the subwoofer is in

standby mode.

The subwoofer is turned off.

* One graduation

of this control

represents 10 Hz.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Yamaha NS-SW500 Owner's Manual Page 5

Comments to this Manuals

Related products and manuals for Subwoofers Yamaha NS-SW500