Yamaha NS-SW500 Owner's Manual download pdf (Page 2)

i En

Thank you for selecting this YAMAHA product.

Please read the following operating precautions before use.

YAMAHA will not be held responsible for any damage and/or

injury caused by not following the cautions below.

• To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

• Install this unit in a cool, dry, clean place - away from

windows, heat sources, sources of excessive vibration, dust,

moisture and cold. Avoid sources of humming

(transformers, motors). To prevent fire or electrical shock,

do not expose this unit to rain or water.

• The voltage to be used must be the same as that specified on

the rear panel. Using this unit with a higher voltage than

specified is dangerous and may cause a fire and/or electric

shock.

• Do not use force on switches, controls or connection wires.

When moving the unit, first disconnect the power plug and

the wires connected to other equipment. Never pull the

wires themselves.

• When not planning to use this unit for a long period (ie., vacation,

etc.), disconnect the AC power plug from the wall outlet.

• To prevent lightning damage, disconnect the AC power plug

when there is an electric storm.

• Since this unit has a built-in power amplifier, heat will

radiate from the rear panel. Place the unit apart from the

walls, allowing at least 20 cm of space above, behind and on

both sides of the unit to prevent fire or damage.

Furthermore, do not position with the rear panel facing

down on the floor or other surfaces.

• Do not cover the rear panel of this unit with a newspaper, a

tablecloth, a curtain, etc., in order not to obstruct heat

radiation. If the temperature inside the unit rises, it may

cause fire, damage to the unit and/or personal injury.

• Do not place the following objects on this unit:

- Glass, china, small metallic, etc.

If glass, etc., falls as a result of vibrations and breaks, it

may cause bodily injury.

- A burning candle etc.

If the candle falls as a result of vibration, it may cause fire

and bodily injury.

- A vessel containing water

If the vessel falls as a result of vibration and water spills,

it may cause damage to the speaker, and/or you may get an

electric shock.

• Do not place this unit where foreign material, such as

dripping water. It might cause fire, damage to this unit, and/

or personal injury.

• Never put a hand or a foreign object into the YST port

located on the right side of this unit. When moving this unit,

do not hold the port, as it might cause personal injury and/or

damage to this unit.

• Never place a fragile object near the YST port of this unit. If

the object falls or drops as a result of the air pressure, it may

cause damage to the unit and/or personal injury.

• Never open the cabinet. It might cause an electric shock,

since this unit uses a high voltage. It might also cause

personal injury and/or damage to this unit. If something

drops into the set, contact your dealer.

• When using a humidifier, be sure to avoid condensation

inside this unit by allowing enough space around this unit or

avoiding excess humidification. Condensation might cause

fire, damage to this unit, and/or electric shock.

• Super-bass frequencies reproduced by this unit may cause a

turntable to generate a howling sound. In such a case, move

this unit away from the turntable.

• This unit may be damaged if certain sounds are

continuously output at high volume level. For example, if

20 Hz-50 Hz sine waves from a test disc, bass sounds from

electronic instruments, etc., are continuously output, or

when the stylus of a turntable touches the surface of a disc,

reduce the volume level to prevent this unit from being

damaged.

• If you hear distortion (i.e., unnatural, intermittent “rapping” or

“hammering” sounds) coming from this unit, reduce the volume

level. Extremely loud playing of a movie soundtrack’s low

frequency, bass-heavy sounds or similarly loud popular music

passages can damage this speaker system.

• Vibration generated by super-bass frequencies may distort

images on a TV. In such a case, move this unit away from

the TV set.

• Do not attempt to clean this unit with chemical solvents as

this might damage the finish. Use a clean, dry cloth.

• Be sure to read the “TROUBLESHOOTING” section

regarding common operating errors before concluding that

the unit is faulty.

• Install this unit near the wall outlet and where the AC power

plug can be reached easily.

• Secure placement or installation is the owner’s

responsibility. YAMAHA shall not be liable for any

accident caused by improper placement or installation

of speakers.

• VOLTAGE SELECTOR

(Asia and General models only)

The voltage selector switch on the rear panel of this unit

must be set to your local main voltage BEFORE

plugging this unit into the AC main supply. Voltages are

110-120 V/220-240 V.

For U.K. customers

If the socket outlets in the home are not suitable for the plug supplied

with this appliance, it should be cut off and an appropriate 3 pin plug

fitted. For details, refer to the instructions described below.

Note: The plug severed from the mains lead must be destroyed, as

a plug with bared flexible cord is hazardous if engaged in a live

socket outlet.

SPECIAL INSTRUCTIONS FOR U.K. MODEL

CAUTION: Read this before operating your unit

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

This unit is not disconnected from the AC power source as

long as it is connected to the wall outlet, even if this unit

itself is turned off. In this state, this unit is designed to

consume a very small quantity of power.

IMPORTANT:

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this apparatus

may not correspond with the coloured markings identifying

the terminals in your plug, proceed as follows: The wire

which is coloured BLUE must be connected to the terminal

which is marked with the letter N or coloured BLACK. The

wire which is coloured BROWN must be connected to the

terminal which is marked with the letter L or coloured RED.

Make sure that neither wire is connected to the earth terminal

of a three pin plug.

1 2 3 4 5 6 7 ... 11 12

Comments to this Manuals

No comments

Yamaha NS-SW500 Owner's Manual Page 2

Comments to this Manuals

Related products and manuals for Subwoofers Yamaha NS-SW500