Yamaha V4.0 Owner's Manual Page 434
- Page / 526
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Chapter 6 Component Guide
DME Designer Owner’s Manual
434
*1 The amount of gain compensation varies according to the number of channels for which input is detected as follows:
*2 The setting range of Response Time varies according to the operating frequency as follows:
44.1kHz: 110 msec to 46.0 sec, 48kHz: 101 msec to 42.3 sec, 88.2kHz: 55 msec to 23.0sec, 96kHz: 51 msec to 21.1 sec
Section Parameter Setting Range Function
1
Input Channel Phase ON/OFF Inverts the phase of each input channel.
2
Auto ON/OFF Specifies whether each channel is applied to
automatic compensation or not.
3
Input Detect Lights when the input level exceeds the
Detect Gain setting.
4
Detect Gain -54 to 0 dB Sets the threshold level above which input
signals will be detected. The master output
level is automatically adjusted (reduced) to
maintain a constant level according to the
number of channels for which input is
detected. (*1)
5
O/Ride ON/OFF The corresponding channel is given output
priority when this parameter is ON. All other
channels are muted.
6
Mode Last/Mix Determines whether only the last channel
given priority via the O/Ride parameter is
turned ON (Last), or whether multiple
channels can be turned ON (Mix).
7
On ON/OFF Turns the input to each channel ON.
8
Fader -∞ to +10 dB Sets the input level for each input channel.
9
Master Output Level Meter Displays the master output level.
)
Response Time *2 Sets the response time for reducing the
amount of output level compensation (gain
increase).
!
On ON/OFF Turns the master output ON.
@
Fader -∞ to +10 dB Sets the master output level.
Number of detected
input channels
Amount of gain
compensation
0 0.0 dB
1 0.0 dB
2 -3.0 dB
3 -4.8 dB
4 -6.0 dB
5 -7.0 dB
6 -7.8 dB
7 -8.5 dB
8 -9.0 dB
9 -9.5 dB
10 -10.0 dB
11 -10.4 dB
12 -10.8 dB
13 -11.1 dB
14 -11.5 dB
15 -11.8 dB
16 -12.0 dB
- OWNER’S MANUAL 1
- Version 4.0 1
- SPECIAL NOTICES 2
- The DME Audio System Network 3
- Components 4
- Configurations 4
- Preset Parameters 4
- Scenes 5
- DME Data Structure 6
- SP2060 Data Structure 7
- Main Panel Window 10
- Designer Window 10
- Component Editor/Component 10
- Changes from V1.1 to V1.2 11
- Component Editor Window 13
- MIDI Setup 13
- V1.2 Precautions 13
- Changes from V1.2 to V2.0 14
- V2.0 Precautions 15
- Changes from V2.0 to V3.0 16
- V3.0 Precautions 17
- Changes from V3.0 to V3.5 18
- Changes from V3.5 to V3.8 19
- Changes from V3.8 to V4.0 20
- Contents 21
- Appendix 509 22
- Troubleshooting 521 22
- Index 522 22
- Chapter 1 Before Using 23
- Designer] 23
- Closing DME Designer 25
- Main Panel Window 26
- Zone Window 28
- Configuration Window 28
- User Module Window 28
- Toolkit Window 29
- Navigator Window 29
- Resource Meter Window 29
- Objects and Components 29
- Component Editor 30
- Window Operations 30
- About Users 31
- Automatic Logging On 31
- 4 Click the [OK] button 32
- Logging Off 33
- Project Files 34
- Creating New Project Files 34
- Name Description Extension 34
- Saving Project Files 35
- Click the [Save] button 37
- Opening Project Files 39
- Recently Used Files 40
- Closing Project Files 41
- DME Data File 41
- DME Data Import 42
- 4 Enter the filename 44
- Library Files 45
- DME Designer All Files 45
- Name Folder 47
- Communication Driver Setup 50
- Storing and Checking Scenes 50
- Recalling Scenes 51
- IP Address Selection 52
- Going Online 52
- Tool Button (Large) 56
- Current Zone 56
- Current Scene 57
- [Change displayed Scene] 57
- (displays DME groups/SP2060s) 57
- [User] (Logged On User) 58
- Current Device Group 58
- Current Configuration 58
- [On-line] Button 59
- [File] Menu 60
- [Yes] Button 60
- [No] Button 60
- [Setup] Menu 67
- [Hardware] Menu 67
- [About] Menu 69
- Preparing the graphic data 71
- Replacing the graphic data 71
- [Component Editor] Tab 73
- Common to All Tabs 74
- DME List 76
- “Log Setup” dialog box 77
- Record _ days per log file 77
- Log file folder 77
- “Get Log” dialog box 78
- “Event Log List” Dialog Box 79
- Event Log List 80
- Scene Manager 82
- Configuration 84
- Edit Security 84
- Recall Security 84
- Fade Mode 84
- Fade Time 85
- Partial Recall 85
- Click the [Insert] 85
- [Recall Safe] Tab 86
- • Component Tree 87
- [Partial Recall] tab 87
- • Partial Recall List 87
- Common Tab Functions 88
- • [Select All] Button 88
- • [Clear All] Button 88
- •[OK] Button 88
- • [Cancel] Button 88
- [Recall] Button 89
- [Detail] Button 89
- Preset parameters 90
- User Controls 91
- [User Level]/[User Name] 93
- • [User Level] 93
- • [User Name] 93
- Parameter Link 94
- Parameter Link Group List 95
- • Keep Offset 96
- • Parameter 96
- Online and Offline 97
- “Synchronization” Dialog Box 98
- • IP Address 100
- DME Name 100
- IP Address Select Box 100
- IP Address 100
- • Device Icon 100
- “Event Scheduler” Dialog Box 101
- Names and Functions 101
- Chapter 3 Main Panel Window 102
- DME Designer Owner’s Manual 102
- See “Clock” on page 180 103
- [Event Operation] 104
- • When [GPI Out] is selected: 105
- [Event Schedule] 106
- [Event Exceptions] 107
- [Wave File] 109
- [Store] Button 109
- [Open File Dialog] 110
- [Wave File] 110
- [External Input] 110
- About GPI 112
- “GPI” Dialog Box 113
- [Function] 114
- •[No Assign] 114
- • [Parameter Value Edit] 114
- •[Direct Parameter Value] 115
- • [Scene Change] 116
- • [Scene Increment] 116
- • [Scene Decrement] 117
- •[GPI Lock] 119
- • [Time Adjustment] 120
- •[Play Wav File] 121
- Terminal Polarity GPI Output 122
- • [Audio Detector] 123
- [OK] Button 125
- [Cancel] Button 125
- [Control Change] Tab 126
- Component 126
- Parameter 127
- [Program Change] Tab 128
- [Parameter Change] Tab 129
- [Clear] Button 131
- [Clear All] Button 131
- User Defined Parameters 132
- Function Keys 132
- Function 133
- LCD Display 134
- Min, Max 134
- [Controller] 138
- [Label] 138
- [Parameter] 138
- Internal HA Control 141
- Remote Connection 142
- Digital Mixer 142
- D-SUB 9-pin Cable 142
- Network 142
- CobraNet Connection 143
- EtherSound Connection 144
- (mode 2) 144
- Component List 147
- [Min]/[Max] 147
- [Print] Button 148
- [Setup] Button 149
- “Scene Link Manager” Window 151
- SP2060 Library Manager 153
- Communication Port Setup 155
- User Setting Restrictions 157
- [Administrator] User 157
- Security Level 158
- [Enable Auto-Log On] 159
- User List 160
- 5 Operation Security 161
- [Name] Box 162
- [Password] Box 162
- [Confirm Password] Box 162
- [OK] Button 162
- [Cancel] Button 162
- Creating Users 163
- Click the [OK] button 164
- “Network Setup” Window 165
- IP Address 166
- Master ID 166
- Link Mode 166
- MAC Address 166
- “Utility” Window 167
- Date/Time 168
- Daylight Saving Time 168
- [Clock setup] Button 168
- Network Tab 169
- Display Tab 169
- Panel Lock Boot 170
- Panel Lock Target 170
- User Defined Page Lock 170
- User Lock 170
- Scene Store 171
- Last Mem. Resume 171
- Event Scheduler 171
- DME Remote Control 172
- External HA Control 173
- MIDI Tab 174
- Protocol 175
- GPI Tab 176
- $MPDL*OGPSNBUJPO 177
- 4MPU*OGPSNBUJPO 177
- $MPDL4UBUVT 177
- Status Meaning 178
- Monitor Out 179
- [Offset] 180
- [Start Time] 180
- [End Time] 180
- [Day of the Week] 181
- [Target DME] 183
- [Folder] Box 183
- [Load] Button 183
- [Save] Button 183
- [Close] Button 183
- SP2060 Backup 184
- [Restore] Tab 185
- DME Firmware Update 186
- [Update] button 187
- [Recovery Update] 188
- Click the [Update] button 189
- Device Information 190
- Chapter 4 Designer 192
- Configurations 192
- New Configurations 192
- Security 192
- Edit Mode 192
- Designer Window 193
- Too lb ar 194
- Status Bar 195
- Resource Meter Window 196
- Navigator Window 197
- Displayed in the designer 198
- Floating-style 198
- Displaying the Toolkit Window 199
- Moving the Toolkit Window 199
- Toolkit Window Types 200
- [Area Parts List] 200
- [Device List] 201
- Four Design Windows 202
- [Print] Menu 203
- [“Print” dialog box] 203
- [Edit] Menu 204
- [View] Menu 205
- Long name 206
- Short name 206
- [Tools] Menu 207
- [Window] Menu 209
- Object Types 210
- Window Where It can be 210
- Placed/Displayed 210
- Explanation 210
- [Display Order] 211
- [Properties] 211
- Zone Object Properties 212
- Background Image 213
- DME8i-C/DME8o-C/DME4io-C 214
- DME8i-ES/DME8o-ES/DME4io-ES 214
- CobraNet Card/EtherSound Card 216
- Scene Info [On-line] Button 216
- DME Object Context Menu 217
- [Output Level] 218
- DME Satellite 218
- I/O Card 220
- Port Style On Zone Window 220
- Compile Priority 220
- Head Margin 222
- Mixer I/O Channel 222
- [Check All] Button 223
- [Clear All] Button 223
- ICP Object Context Menu 224
- ICP Properties 225
- [Open Configuration Window] 226
- [Device Group Manager] 226
- [Configuration Manager] 226
- [Synchronization] 226
- SP2060 Properties 228
- •[Right] 229
- • [Edit Port Label and Type] 229
- External Device 230
- External Device Properties 232
- Launch Application 233
- •[DME Unit] 234
- [Recall Component Library] 236
- • [Open File Dialog] 236
- [Store Component Library] 236
- SPX Component 238
- SPX Component Properties 239
- Slot Component 240
- Slot Component Properties 241
- • [Application] Box 242
- User Module 243
- [Save User Module] 244
- User Module Properties 245
- • [Open User Module Editor] 246
- • [Enable Security] 246
- • [Set Password] Button 246
- Placing Pictures 247
- Picture Object 248
- Picture Object Properties 249
- [Select Component] Button 250
- Tex t B ox 251
- Text Object Properties 252
- Box (Rectangle) 253
- Box Object Properties 254
- Ellipse Object Context Menu 255
- Ellipse Object Properties 256
- Line SegmentNode 257
- Termination 257
- Line Segment Context Menu 257
- Node Context Menu 258
- Termination Context Menu 258
- Wire Object Properties 259
- Legend (Descriptive Fields) 260
- [Address2] Box 260
- “Sheet Settings” Dialog Box 262
- Background Effect 263
- [Save As Default Sheet Size] 263
- “Select Font” Dialog Box 264
- “Select Color” Dialog Box 265
- “Select Image” Dialog Box 267
- Preferences 268
- Ports & Wires 268
- •[Color] 268
- • [Width] 268
- • [Type] 268
- Crosshairs 269
- Auto Suffix Number 269
- • [X:] Box 270
- • [Y:] Box 270
- Exporting Each Design Window 271
- “Export DXF” dialog box 272
- [Paper Size] 273
- Printing Each Design Window 274
- Arranging Objects 275
- Device Group Selection 276
- Group Assignment 276
- •Existent Group 276
- • New Group 276
- Sampling Frequency 276
- Selecting Objects 277
- Editing Objects 277
- Changing the Order 278
- [Bottom] 278
- Line Segment Selection 279
- Node Selection 280
- Canceling Node Selection 280
- Using Shortcuts 281
- Drawing Settings 282
- Wire Drawing 282
- Method 1 Clicking 283
- Method 2 Dragging 283
- Connect with Bent Line 284
- Press <Ctrl> Key 285
- Multiple Hotspots Selected 285
- Wire Editing 288
- Deleting an Entire Wire 288
- Deleting Nodes 288
- Moving Nodes 288
- Moving Line Segments 289
- Logical connection 289
- Window Wire 289
- Show Unconnected Node 290
- “Zone Manager” dialog box 291
- Zone List 291
- [Add] Button 291
- [Delete] Button 291
- [Rename] Button 292
- [Close] Button 292
- Changing Device Groups 293
- [Color] Button 294
- Device Group 295
- [Duplicate] Button 296
- Area Window 297
- Zone Window 298
- Placing DME or SP2060 300
- ICP Placement 300
- Tool Bar 301
- Placing Components 302
- [Input A/B Link] Button 303
- Probe Monitor 303
- Turn the probe monitor ON 303
- L/R Selection 304
- Exiting the Probe Monitor 304
- Monitoring Point List 306
- Monitoring Point List 307
- Message Box 308
- Progress Bar 308
- User Modules 309
- Creating User Modules 309
- Saving User Modules 310
- [Open User Module Editor] 311
- [Enable Security] 311
- [Set Password] Button 312
- Editing User Modules 313
- User Module Manager 314
- Double Click Action 315
- Security Settings 315
- Default Library 315
- [Export] Button 316
- Default Library 318
- User Module Group 318
- Chapter 5 Editor Window 319
- Component Name 320
- Component ID 320
- Parameter ID 320
- Drag to adjust the parameter 321
- “Preferences” dialog box 321
- • Displays a menu 322
- • Displays another window 322
- Mouse-over 323
- Double-click 323
- Graph 324
- User Control Editor 325
- User Control Name 326
- New User Control 326
- 5 Click the [OK] button 327
- User Control Security 328
- User Control Security Level 328
- User Module Editor 330
- [Align Left] Button 332
- [Align Right] Button 332
- Chapter 5 Components 333
- Changing the Window Size 334
- [Select Color] Button 335
- [Image] 336
- Placing Controls 337
- When You Cannot Copy 341
- Order of Controls 341
- Moving and Aligning Controls 342
- Dragging 342
- Arrow Keys 342
- Cut/Copy/Paste Controls 343
- Knob/Slider Conversion 343
- Control Properties 344
- [Text] box 346
- [Text Font] Button 346
- [Direction] 348
- [Threshold Logic] 348
- Frame Size 349
- Line Width 350
- Frame Color 350
- Fill Color 350
- [File Path] Box 351
- [Select File] Button 351
- [Link Component Editor] 351
- Text Properties Dialog Box 352
- Box Properties Dialog Box 353
- Ellipse Size 354
- Changing the Tab Order 357
- [Design Mode] 359
- [Peak Hold] 359
- •[Reset] 359
- Location 360
- 3 Click another snap button 362
- Recalling a Library 363
- The library is recalled 363
- 3 Enter the filename 365
- 5 Click the [Save] button 365
- Click the [Open] button 367
- Global Link 368
- Local Link 369
- Creating Component Links 370
- Chapter 6 Component Guide 371
- Component Groups 371
- (*) Parameter edit only 378
- Ambient Noise Compensator 379
- Program Source Input level 380
- Ambient Noise Level 380
- Program Source Gain 380
- Audio Detector 381
- Auto Gain Control 382
- Crossover 383
- Graphic Control Points 385
- LFP/HPF 386
- Crossover Processor 387
- Crossover 388
- Parametric Equalizer 391
- Compressor 392
- Crossover Processor II 393
- Delay Long 399
- Delay Short 400
- • [SELF] 402
- • [L]/[R] 402
- •[LR BOTH] 402
- • [KEYIN] 402
- Compander 403
- Compressor 404
- De-Esser 405
- Ratio=2:1 406
- Knee=Hard 406
- Threshold=–20dB 406
- Ducking component editor 407
- Expander 408
- Threshold=–10dB 409
- Input Level (dB) 410
- Output Level (dB) 410
- Program Ducker 412
- Equalizer (EQ) 414
- EQ Graph [Bypass] Button 415
- Parametric Equalizer (PEQ) 416
- • L. SHELF (Low Shelving) 417
- • H.SHELF (High Shelving) 417
- [Fade] 418
- Feedback Suppressor 419
- Band Pass Filter (BPF) 420
- High Pass Filter (HPF) 421
- Low Pass Filter (LPF) 422
- Notch Filter (Notch) 423
- Programmable BPF 424
- Programmable HPF 426
- Programmable LPF 427
- Name Function 428
- Miscellaneous 429
- Wav File Player 430
- Auto Mixer 431
- Auto Mixer II 433
- Delay Matrix 435
- Input Master 437
- Output Master 437
- All Inputs to One Output 438
- One Input to All Outputs 439
- Input Channel Switching 440
- Crosspoint 441
- Channel Group Switching 442
- Matrix Mixer 442
- Matrix (Output Level) 444
- Output Master Window 445
- Simple Mixer 450
- EQ Editor Window 452
- Center (Center Nominal) 453
- LR (LR Nominal) 453
- 16 channels 454
- Surround 455
- Speaker Button 456
- Surround 3-1 457
- Surround 5.1 458
- Surround 6.1 459
- Room Combiner 460
- Routing Settings 462
- Clearing Routing Settings 462
- Source Selector 463
- Speaker Processor 464
- Graph Control Points 466
- Limiter 470
- SPX component editor 471
- 0 to 100 Delay time offset 476
- HOME UTILITYSCENE LEVEL MUTE 482
- ENTERCANCEL 482
- AEC Component Editor 484
- Slot In 487
- Slot Out 488
- Cascade (DME64N only) 489
- Cascade Out 490
- CASCADE bus 491
- Analog Input and Output 492
- Analog Output 493
- SP2060 Input and Output 494
- CobraNet Input and Output 495
- “Advanced Settings” Window 496
- EtherSound Input and Output 497
- Input Format/Output Format 498
- MY8-AE96S 499
- MY16-C 500
- MY16-CII 501
- MY4-AEC 502
- Remote Controlled Head Amp 503
- (page 230) 504
- AD8HR component editor 504
- Component Glossary 505
- Release (Release Time) 508
- Threshold 508
- Appendix 509
- Main Display 511
- Parameter Edit Displays 512
- ENTERENTER 513
- Utility Displays 516
- Network Address Host Address 517
- Display Setup (Disp) Page 518
- Security Setup (Lock) Page 518
- Miscellaneous Setup (Misc) 519
- Initializing the ICP1 520
- 4. Press the [ENTER] key 520
- Troubleshooting 521
Related products and manuals for Software Yamaha V4.0
Software Yamaha V3 Owner's Manual
(83 pages)
(83 pages)
Software Yamaha MOX6 Manual
(160 pages)
(160 pages)
Software Yamaha XF6 Manual
(255 pages)
(255 pages)
Software Yamaha MOXF8 Manual
(163 pages)
(163 pages)
Software Yamaha MOX6 Owner's Manual
(57 pages)
(57 pages)
Software Yamaha PSR-S975 Manual
(136 pages)
(136 pages)
Software Yamaha Tyros3 Manual
(130 pages)
(130 pages)
Software Yamaha FP7210A User Manual
(2 pages)
(2 pages)
Software Yamaha HS650A User Manual
(2 pages)
(2 pages)
Software Yamaha HS850 User Manual
(1 pages)
(1 pages)
© 2020, manymanuals.com. All rights reserved. | 0.105 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals