Yamaha V4.0 Owner's Manual download pdf (Page 221)

100

101

Chapter 4 Designer

DME Designer Owner’s Manual

221

Cascade

Turns the DME 64N cascade ON or OFF.

• Show Cascade Port on Configuration Window

Checking this enables cascade.

• [Cascade Setting]

Here you can make settings that apply when cascade is enabled. Clicking here displays the

“Cascade Setting” dialog box.

 See “Cascade Setting” dialog box on page 221.

[OK] Button

Accepts the changed settings and closes the dialog box.

[Cancel] Button

Closes the dialog box without changing the settings.

 “Cascade Setting” Dialog Box

Click the [Cascade Setting] button to display the “Cascade Setting” dialog box via which DME64N

cascade connections can be verified and edited as required. Make sure that the Head Margin and

Mixer I/O settings are the same for multiple cascaded DME64N units. These settings are matched

automatically for DME64N units that are connected via their [CAS IN] and [CAS OUT] terminals in

the Zone window.

Unit No. (Cascade Connection Number)

These settings automatically produce appropriate delay compensation for cascade-connected

DME64N units. When DME64N units are connected via their [CAS IN] and [CAS OUT] terminals in

the Zone window, DME64N units other than the first unit (default unit no. 1) are automatically

assigned sequential unit numbers. If the number of the first unit is changed the numbers of the

other units are automatically changed accordingly. If multiple “first units” exist in the same device

group, those first units can all be assigned Unit No. 1. Unit numbers are also automatically

assigned for cascade connections that span device groups.

NOTE

Refer to “Cascade (DME64N only)” (page 489) for input/output and cascade bus assignments.

1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 525 526

Comments to this Manuals

No comments

Yamaha V4.0 Owner's Manual Page 221

Comments to this Manuals

Related products and manuals for Software Yamaha V4.0