Chapter 6 Component Guide
DME Designer Owner’s Manual
401
4
Delay Tap Delay ms: 0 to 130
Sample: the range depends
on the Fs value.
Meter: 0 to 44.7
Feet: 0 to 146.5
Frame: the range depends on
the Frame value.
Beat: the range depends on
the Beat value.
Sets the delay time.
There are two edit boxes, displaying
milliseconds and the units selected for [Delay
Scale].
5
Level -∞ to ±0 dB Sets the output signal level for each channel.
6
On ON/OFF Turns ON each channel’s delay.
7
Mute ON/OFF Turns ON muting for each channel’s output.
8
Delay Scale ms
Sample
Meter
Feet
Frame
Beat
Selects the units for setting the delay time.
The selected button will light up, and the
units in the [Delay] edit box will change.
If [Beat] is selected, use the knob to set the
BPM (beats/minute).
NOTE
Delay Scale does not support the parameter link feature. Refer to “Parameter Link” on page 94 for information on parameter
linking.
Section Parameter Setting Range Function
Comments to this Manuals