Yamaha RM1x Specifications download pdf (Page 89)

RM1x SEQUENCE REMIXER 89

PATTERN MODE

Job 09 Chord Separate

This job plays opens each chord formation (within the speci-

fied segment of the specified track) into its individual notes,

inserting a specified delay between each note.

If the Clock value is set to 30, a block chord consisting of

elements C3, E3, G3 will be played as a C3 (at the chord’s

original timing) followed 30 cycles later by the E3, and then

another 30 cycles later by the G3. This feature is useful, for

example, when you want to open up guitar strokes.

Note that it is not possible to break chords over the next meas-

ure boundary or into the next chord.

1. Phrase setting: Phrs

Sets the phrase to which adjustment is applied.

■ Settings : 001 ... 256

2. Segment (M001:1:000 ~ M257: 1:000)

Sets the area of the phrase over which adjustment is

carried out. The first segment sets the measure, beat,

and clock for the start point; the second segment sets

the end point.

■ Settings : Measure: beat : clock

001:1:000 ... 257:1:000

3. Clock cycles

The Clock value sets the number of clock cycles in-

serted between adjacent chord notes.

Note that there are 480 clock cycles per beat.

■ Settings: 000 ... 999

❏ Event

Job 10 Shift Clock

This job executes a time shift of all data events on the se-

lected segment of the selected track. The shift is executed in

clock-cycle increments.

If you wish to move events by one or more full beats or meas-

ures, you may find it easier to use the Copy Event job. (be-

low)

Note that this job will never move an event past the desig-

nated segment’s start or end points; any event that would oth-

erwise move past this point is instead deposited at the seg-

ment’s border.

1. Phrase setting: Phrs

Sets the phrase to which adjustment is applied.

■ Settings : 001 ... 256

2. Segment (M001:1:000 ~ M257: 1:000)

Sets the area of the phrase over which adjustment is

carried out. The first segment sets the measure, beat,

and clock for the start point; the second segment sets

the end point.

■ Settings : Measure: beat : clock

001:1:000 ... 257: 1:000

3. Clock

The Clock value sets the number of measure, beat, and

clock for the data shift.

Note that there are 480 cycles per beat.

■ Settings : Measure: beat : clock

001:1:000 ... 255: 3:479

4. Direction

Specifies the direction in which the data will be shifted.

“ADVANCE” moves the data toward the beginning of

the piece (i.e. notes will sound earlier), while “DELAY”

shifts the data toward the end of the piece (i.e. notes

will sound later).

■ Settings : ADVANCE, DELAY

Job 11 Copy Event

This job copies all data from a specified source area (phrase)

to a specified destination, overwriting any data already exist-

ing at the destination.

1. Source phrase

The Phrs value selects the track from which the data

are copied.

■ Settings : 001 ... 256

12. Job

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 153 154

Comments to this Manuals

No comments

Yamaha RM1x Specifications Page 89

Comments to this Manuals

Related products and manuals for Sequencer Yamaha RM1x