Yamaha RM1x Specifications download pdf (Page 132)

132 RM1x SEQUENCE REMIXER

UTILITY MODE

1. System

Here you can make settings for system-related parameters, such as Master Tune.

❏ page1

1. System

[Footswitch function list]

START/STP Each time the footswitch is pressed, the song or pattern will alternately start or stop.

SEC Each time the footswitch is pressed, the Section of the pattern will be switched in the order of A - P.

SUS All notes played while the footswitch is held will be sustained until the footswitch is released.

TAP This useful function lets you use the footswitch to tap out the BPM (Tempo) . Simply tap (press/release) the footswitch three

times, and the song or pattern starts automatically at the BPM you tapped. The BPM can also be changed during playback

by tapping the footswitch three times at the desired tempo.

Parameter Values Function

Master tune -102.4 ... 0 ... +102.3 Sets the overall tuning of the entire RM1x in 0.1 cent steps.

The pitch of drum voices cannot be adjusted here.

One cent is 1/100th of a semitone.

Footswitch START/STP, SEC, SUS, TAP Sets the function of the footswitch connected to the rear panel FOOT

SW connector.

For details, see the list below.

Pattern Quantize 1, 1/16 Sets the quantize value for pattern switching during playback. When

set to “1” patterns (sections) will always switch on the first beat of

the measure during playback. When “1/16” is selected patterns (sec-

tions) can be switched on any 16th beat during playback.

Memory Protect on/off ON, OFF Turns memory protection on or off. When “ON” no operations which

alter or overwrite the contents of the RM1x memory can be per-

formed (e.g. record or edit or job), preventing accidental changes to

the memory or tampering.

* For information about how to change values, refer to the Basic Operation (page26).

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 153 154

No comments

Yamaha RM1x Specifications Page 132