Yamaha RM1x Specifications Page 42

  • Download
  • Add to my manuals
  • Print
  • Page
    / 154
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 41
42 RM1x SEQUENCE REMIXER
BASIC CONCEPT
7. About floppy disks
On the RM1x, floppy disks are used to save data that you
create, or to exchange data with other devices. This section
explains the types of floppy disks that the RM1x can use, and
things you should know about floppy disk handling.
Types of floppy disk
The RM1x can use two types of floppy disk: 3.5 inch 2HD
and 3.5 inch 2DD.
Before data files can be stored on a floppy disk, the disk must
be formatted (initialized) (page 79).
The RM1x formats 2HD disks to 1.44 MB (megabytes) and
2DD disks to 720 KB (kilobytes) MS-DOS format. (MS-DOS
is a registered trademark of Microsoft Corporation.)
Since this format is common to computers as well as to Yamaha
products and the products of other manufacturers, it allows
disk compatibility.
3.5 inch 2HD
1.44 MB
3.5 inch 2DD
720 KB
Inserting a floppy disk
With the label side of the floppy disk facing upward, insert it
into the floppy disk drive starting with the end with the shut-
ter.
Push the disk gently in until it clicks into place.
Push disk gently in until it clicks into place
7. About floppy disks
Removing a floppy disk
After making sure that the floppy disk drive is not in use,
firmly press the eject button, make sure that the floppy disk
has been completely ejected, and remove it from the drive.
Press the eject button firmly and accurately,
and make sure that the disk is ejected
If the disk catches inside and does not slide out smoothly,
firmly press the eject button once again, or re-insert the floppy
disk and then press the eject button once again.
While the disk-in-use indicator is lit, data is being transferred
between the floppy disk and the RM1x. While the disk-in-use
indicator is lit, never turn off the power or attempt to remove
the floppy disk.
Doing so could damage not only the floppy disk but also the
floppy disk drive.
Regular cleaning of the disk
drive heads
Floppy disk drives contain a high-precision magnetic head.
When a floppy disk drive is used for an extended period, the
heads will become soiled by magnetic particles from the floppy
disk. This will increase the chance of errors occurring when
data is read or written.
In order to keep the floppy disk drive in good condition, we
recommend that you clean the heads regularly (once a month).
Floppy disk handling and storage
Floppy disks should not be placed in locations of direct sun-
light or temperature extremes, or in excessively damp or dusty
locations.
Do not allow floppy disks to come near objects that have a
strong magnetic field, such as televisions or speakers.
Before turning off the power, remove the floppy disk from
the disk drive. Leaving a floppy disk in the drive for a long
period with the power turned off can cause the disk to become
dirty, producing read/write errors.
Page view 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 153 154

Comments to this Manuals

No comments