Yamaha RM1x Specifications download pdf (Page 26)

Basic Operation

26 RM1x SEQUENCE REMIXER

3. Changing (Editing) Values

❏ Numeric Entry

Numeric entry can be useful when you know precisely the

value you want to enter, making it unnecessary to scroll

through long lists of values or parameters to get the desired

effect.

For numeric entry the cursor must be located at the value to

be edited. Press and hold the [NUM] keyboard mode button

— the LEDs above the keys marked “1” through “9” and “0”

will light, indicating that those keys can be used to enter a

numeric value. While still holding the [NUM] button, press

the number keys to enter the value, starting from the leftmost

digit. To enter the value “104,” for example, press “1,” “0,”

and then “4.” When the desired value has been specified, re-

lease the [NUM] button. The value should be flashing on the

display as entered. Finally, press the [ENTER] button to actu-

ally enter the specified value.

The RM1x lets you adjust and edit values in three ways:

❏ The Display Knobs

The display knobs provide a fast, easy way to adjust and edit

corresponding parameters. If any parameters in the selected

display can be accessed via the display knobs, they will ap-

pear directly above the knobs as shown in the example below.

To adjust a knob-related parameter, simply rotate the knob

either clockwise to increase the value or counter-clockwise to

decrease the value. For more rapid adjustment — when, for

example, you need to quickly cover a large value range —

rotate the appropriate display knob while holding the [SHIFT]

button.

The function of the display knobs does not depend on cursor

location, so you adjust the related values with the cursor lo-

cated at another position on the display.

❏ The [NO -1] and [YES +1] But-

tons

The [NO -1] and [YES +1] buttons offer a convenient, precise

way to increment or decrement the selected value in single-

step increments. After making sure that the cursor is located

at the value to be edited, press either the [NO -1] or [YES +1]

once briefly for a single step in the corresponding direction,

or hold the button for continuous scrolling.

Note that the [NO -1] and [YES +1] buttons are also used to

confirm or abort certain operations — thus the “NO” and

“YES” labels.

n • For even faster decrementing or incrementing, press the

opposite increment/decrement button while holding the

button corresponding to the direction you want to incre-

ment/decrement in.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 153 154

Comments to this Manuals

No comments

Yamaha RM1x Specifications Page 26

Comments to this Manuals

Related products and manuals for Sequencer Yamaha RM1x