CONCERTVIBESYV-3910/3710/3700/2700/2700G/1600A/520Owner’s ManualMake sure to read the PRECAUTIONS on page 1.
ASSEMBLY: YV-3910/3710/37008Reinforcement StayPedal StayPedalHigh SoundSideLow SoundSidePlayer SideAudience SideLeg (Small)Leg (Large)Align flat surfa
9ASSEMBLY: YV-3910/3710/3700xInsert the rails (1) through (4) into the legs.2-1 First, insert rail (2).* Do not insert the rail one side at a time, bu
ASSEMBLY: YV-3910/3710/370010c Attach the sustain damper.3-1 z Turn the fixing bolt (damper arm axle) of the damper arm attachment counterclock-wise u
11ASSEMBLY: YV-3910/3710/37003-2 Align the holes in both ends of the damper spring stopper with the protrusions of thefittings on the bottom surfaces
ASSEMBLY: YV-3910/3710/37001223-3 z Loosen the center rod fixing bolts toextend the center rod.x Connect the center rod with the fit-ting of the rod c
5-3 Hold the pedal depressed to keep the sustain damper lowered, and then carefully setthe tone bars.Align each tone bar individually, and hook its st
ASSEMBLY: YV-3910/3710/370014Bottom View6-1Insert mountuntil it stopsDriverSupport FittingBottom ViewFittingPulleyFittingsFixing BoltsMotor UnitLoosen
15ASSEMBLY: YV-3910/3710/3700mAttach the controller.7-1 ● YV-3910/3710 : Loosen the fixing bolt, slide out the controller hanger and hang thecontrolle
Synchro Belt (Fan Belt)* Slide belt over the pulley.Part No. Part Name SpecificationW5128092 Synchro Belt 18OTN15-3.0. Set the synchro belts (fan belt
17ASSEMBLY: YV-3910/3710/3700⁄0ADJUSTMENTS10-1 Pedal Stroke AdjustmentLoosen the center rod fixing bolts to adjust theprotruding length of the center
This product utilizes an external power supply (adapter). DONOT connect this product to any power supply or adapterother than one described in the man
18ASSEMBLY: YV-3910/3710/3700* The fourth notch from topcorresponds to the standardheight setting.Slide LegThis adjustment should always be performed
MOTOR OUTDC 12V INBEFORE PLAYING : YV-3910/3710/3700/2700/2700G/1600A/520 Power SupplyPrepare the supplied AC adapter.* Make sure to use the suppl
20CONFIRMATION OF PACKING CONTENTS : YV-2700/2700G/1600A/520q Vibes Main Unitr Resonators (Natural Tone Side)t Resonators (Accidental Tone Side)w Leg
For safety, assembly should be performed by at least 2 persons in a location with sufficient space.We recommend to you to assemble the instrument on a
ASSEMBLY : YV-2700/2700G/1600A/5204 Place the large leg, small leg, pedal stay and reinforcement stay* so that after assem-bly each part will be posit
8 Connect the slide legs with the legs.Align the legs from above so that the slide legs slide into the corresponding leg holes. Adjustto the desired h
ASSEMBLY : YV-2700/2700G/1600A/520Pulley10 Stand up the vibes, and attach the resonators. (Refer to YV-3910/3710/3700 assemblystep v on page 12.)11 Mo
13 Adjust the pedal stroke. (Refer to YV-3910/3710/3700 assembly step 10-1 on page 17.)14 After assembly, confirm that each bolt and screw is tighte
Printed in Japan SPECIFICATIONS/SCALE RANGE● YV-3910Range c–f3, 3-1/2 OctavesBars Aluminum Alloy/Glossy Gold Finish, graduating from 1-1/8" to 2
● Installation LocationUse or storage in the following locations may causedamage, even when packaged.• In direct sunlight, such as near a window, or i
2NOMENCLATURE : YV-3910/3710/3700/2700/2700G/1600A/520 Vibes Drive Unit● Controller (Player Side)* The illustration shows model YV-3710Pedal StayRail
3CONFIRMATION OF PACKING CONTENTS : YV-3700The shipping carton of your YV-3700 should contain the parts shown below.Before assembling the instrument,
4CONFIRMATION OF PACKING CONTENTS : YV-3910/3710The shipping carton of your YV-3910/3710 should contain the parts shown below.Before assembling the in
5CONFIRMATION OF PACKING CONTENTS : YV-3910/3710 Dividable Parts and Collapsible Parts (YV-3910/3710 only)The YV-3910’s/YV-3710’s large parts are des
6ASSEMBLY : YV-3910/3710/3700For safety, assembly should be performed by at least 2 persons in a location with sufficient space.We recommend to you to
7ASSEMBLY: YV-3910/3710/37001-2 ● YV-3910/3710 : Insert the pedal stay with its notch facing up into the lower joint of the large legas far as it will
Comments to this Manuals