Yamaha P50-m User Manual download pdf (Page 44)

SOUND LISTS & MIDI DATA

1.5 Program Change

1100nnnn Cn Status n= channel number

0ppppppp pp Program No. p=0~127

Program Change messages are not received when the Part

Parameter setting Rcv PROGRAM CHANGE = OFF.

When MIDI PROGRAM CHANGE TABLE = OFF, values

other than 0~28 are ignored.

1.6 Channel Aftertouch

1101nnnn Dn Status n= channel number

0vvvvvvv vv Value v=0~127

With the default settings, this has no function.

Channel Aftertouch messages are not received when the

Part Parameter setting Rcv CHANNEL AFTER TOUCH =

OFF.

1.7 Pitch Bend Change

1110nnnn En Status n= channel number

0lllllll ll Value LSB

0mmmmmmm mm Value MSB

Pitch Bend Change messages are not received when the Part

Parameter setting Rcv PITCH BEND CHANGE = OFF.

2. Channel Mode Messages

2.1 All Sound Off

1011nnnn Bn Status n= channel number

01111000 78 Control No.

00000000 00 Control Value

All sounding notes on the corresponding channel will be

silenced.

However the status of channel messages such as Note On

and Hold On will be maintained.

2.2 Reset All Controllers

1011nnnn Bn Status n= channel number

01111001 79 Control No.

00000000 00 Control Value

The values of the following controllers will change.

Controller Setting value

Pitch Bend Range +/–0 (center)

Channel Aftertouch 0 (off)

Polyphonic Aftertouch 0 (off)

Modulation 0 (off)

Expression 127(maximum)

Hold 0 (off)

Portamento 0 (off)

Sostenuto 0 (off)

Soft Pedal 0 (off)

Portamento Control Reset the Portamento Source

Note number that was received

RPN Number un-specified, internal

data not changed.

NRPN Number un-specified, internal

data not changed.

2.3 All Note Off

1011nnnn Bn Status n= channel number

01111011 7B Control No.

00000000 00 Control Value

All notes of the corresponding channel that are currently on

will be turned off.

However if Hold1 or Sostenuto are on, the sound will con-

tinue until these are off.

2.4 Omni Off

1011nnnn Bn Status n= channel number

01111100 7C Control No.

00000000 00 Control Value

This performs the same processing as when All Note Off is

received.

2.5 Omni On

1011nnnn Bn Status n= channel number

01111101 7D Control No.

00000000 00 Control Value

This performs the same processing as when All Note Off is

received.

2.6 Mono

1011nnnn Bn Status n= channel number

01111110 7E Control No.

00000000 00 Control Value

This performs the same processing as when All Sound Off

is received, and if the 3rd byte (the mono number) is in the

range 0~16, sets the instrument to Mode 4 (m=1).

2.7 Poly

1011nnnn Bn Status n= channel number

01111111 7E Control No.

00000000 00 Control Value

This performs the same processing as when All Sound Off

is received, and sets the instrument to Mode 3.

3. System Exclusive Messages

3.1 Parameter Changes

This instrument receives the following parameter changes.

[ UNIVERSAL REALTIME MESSAGE ]

1) Master Volume

[ UNIVERSAL NON REALTIME MESSAGE ]

1) General MIDI Mode On

[ XG NATIVE ]

1) XG System on

2) XG System Data parameter change

3) Multi Effect1 Data parameter change

4) Part Data parameter change

[ P50-m NATIVE ]

1) P50-m System data parameter change

2) Remote switch

[ Other ]

1) Master tuning

3.1.1 Universal Realtime Messages

3.1.1.1 Master Volume

11110000 F0 Exclusive status

01111111 7F Universal Real Time

01111111 7F ID of target device

00000100 04

Sub-ID #1=Device Control Message

00000001 01 Sub-ID #2=Master Volume

0sssssss ss Volume LSB

0ttttttt tt Volume MSB

11110111 F7 End of Exclusive

Alternatively,

11110000 F0 Exclusive status

01111111 7F Universal Real Time

0xxxnnnn xn Device No.xxx = don’t care

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 53 54

Comments to this Manuals

No comments

Yamaha P50-m User Manual Page 44

Comments to this Manuals

Related products and manuals for Musical Instruments Yamaha P50-m