Yamaha Keyboards and Digital - Pianos Owner's Manual download pdf (Page 22)

VAttach the rear panel (B).

With the rear panel’s rough surface facing outward and

the panel slightly angled as shown in the illustration,

lower it onto the feet’s protruding edge at the rear of the

pedal box. Then, while eliminating any gaps between the

rear and side panels, secure the top of the rear panel to the

side panel brackets using two 4 x 10 mm round-head

screws 2. Finally, secure the bottom of the rear panel to

the pedal box using four 4 x 20 mm tapping screws 3.

BInstall the main unit (A).

Place the main unit (A) on the side panels (D) with the

screws on its bottom panel (toward the rear of the main

unit) just behind the grooves in the brackets located at the

top of the side panels. Then slide the main unit forward

until it stops. WATCH YOUR FINGERS WHEN DO-

ING THIS!!

• 4 x 20 mm tapping screws 3

• 4 x 10 mm round-head screws 2

• Be sure to place your

hands at least 15

centimeters from either end of

the main unit when positioning it.

15 cm

• Rough surface

outward.

15 cm

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28 29 30

No comments

Yamaha Keyboards and Digital - Pianos Owner's Manual Page 22