Yamaha KBP-300 Owner's Manual download pdf (Page 45)

English

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate your warranty. Do

not open the system to avoid the risk of electric shock.

If a fault occurs, check the following before taking the system to be repaired. If you are unable to remedy a

problem by following the hints below, consult your dealer or Yamaha for help.

Problem

No power

No picture

Completely distorted picture or

black/white picture

The aspect ratio of the screen cannot be changed

even though you have set the TV display.

No sound or distorted sound.

Sound is too low on one side.

Cannot activate some features such as Angles,

Subtitles, or multi-language Audio.

DVD videos cannot be copied with the VCR.

The disc is ejected without an operation.

NOTE: When sending the product for servicing, both the DVD receiver and the subwoofer are required.

Check if the AC power cord is properly connected.

Press STANDBY/ON on the front of the receiver to turn

on the power.

Refer to your TV’s manual for correct Video In channel

selection. Change the TV channel until you see the DVD

screen.

Press DVD/CD on the remote control in order to switch

to DVD/CD mode.

If this happens when you are changing the setting of the ‘TV

TYPE’, wait for 15 seconds for auto recovery.

If this happens when you are turning on the progressive

scan feature, wait for 15 seconds for auto recovery.

Check the video connection.

Sometimes a small amount of picture distortion may appear.

This is not a malfunction.

Clean the disc.

The aspect ratio is fixed on the DVD disc.

Depending on the TV, it may not be possible to change the

aspect ratio.

Adjust the volume.

Check if the system cable is properly connected.

Check if all speaker cables are properly connected.

Make sure that the audio cables are connected and press

the Input selection buttons to select the correct input

source (TV or AUX, for example) to choose the equipment

that you want to hear through the DVD receiver.

Check if the AC power cord of the subwoofer is properly

connected.

Make sure that you use a disc supported by the DVD player.

Check if all cables are properly connected.

The features may not be available on the DVD.

Changing the language for the sound or subtitle is

prohibited on the DVD.

Most commercially available DVDs include copy protect

features. You cannot make a copy of these DVDs.

Make sure that you use a disc supported by the DVD

receiver.

Solution

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 51 52 53

Comments to this Manuals

No comments

Yamaha KBP-300 Owner's Manual Page 45

Comments to this Manuals

Related products and manuals for Home cinema systems Yamaha KBP-300