Yamaha KBP-300 Owner's Manual download pdf (Page 16)

1 Connect the speaker cable with the white line to

the + connector on the front/center/surround

speaker and with the black band to the

connector.

Notes:

– Ensure that the speaker cables are correctly

connected. Improper connections may damage the

system due to a short-circuit.

– When connecting the speakers, fix the speaker

cables in place so that cables do not loosen. If your

foot or hand accidentally gets caught on a loose

speaker cable, the speaker may fall.

–To prevent unwanted noise, do not place the

subwoofer too close to the DVD receiver, AC power

adaptor, TV or other sources of radiation.

2 Connect the speaker cable with the white line to

the + connector of each terminal on the

subwoofer and with the black band to the

connector.

3 Connect the subwoofer to the DVD receiver using

the system control cable from the subwoofer to

the TO NX-SW300 terminal at the rear of the

DVD receiver.

Connections

–

Press the lever down,

then insert the cable

into the hole and

release the lever.

White

line

Black

band

TO NX-SW300

SYSTEM

CONNECTOR

FRONT

CENTER

SURROUND

SPEAKERS

Lift up the lever, then

insert the cable into

the hole and replace

the lever.

White

line

Lever

Black

band

Lever

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 52 53

Comments to this Manuals

No comments

Yamaha KBP-300 Owner's Manual Page 16

Comments to this Manuals

Related products and manuals for Home cinema systems Yamaha KBP-300