Yamaha KBP-300 Owner's Manual download pdf (Page 23)

English

Setting the TV

IMPORTANT!

Make sure you have completed all the

necessary connections. (See “Connecting a

TV” on page 13)

1 Press DVD/CD.

➜ “DVD CD” appears on the display panel.

2 Turn on the TV and set to the correct video-in

channel. You should see the background screen on

the TV.

➜ Usually this channel is between the lowest and

highest channels and may be called FRONT, A/V IN

or VIDEO. See your TV manual for more details.

➜ Or, you may go to channel 1 on your TV, then

press the Channel down button repeatedly until

you see the Video In channel.

➜ Or, the TV remote control may have a button or

switch that chooses different video modes.

Getting Started

Selecting the color system that

matches your TV

In order for a DVD to play on this DVD receiver,

the color system of the DVD, the TV and the DVD

receiver should match. Before changing the TV

system, determine the color system of your TV.

1 In DVD/CD mode, press SET UP.

2 Press 3 repeatedly to select [VIDEO SETUP

PAGE].

3 Press 5∞ to highlight [TV TYPE], then press 3.

TV TYPE

TV DISPLAY

PROGRESSIVE

PICTURE SETTING

BLACK LEVEL

CLOSED CAPTION

PAL

NTSC

MULTI

4 Press 5∞ to highlight one of the options below:

PAL – Select this if the connected TV has the PAL

color system. It will change the video signal of an

NTSC disc and output it to PAL format.

NTSC – Select this if the connected TV has the

NTSC color system. It will change the video signal

of a PAL disc and output it to NTSC format.

MULTI – Select this if the connected TV is

compatible with both NTSC and PAL (multi-

system). The output format will be in accordance

with the video signal of the disc.

5 Select a setting and press ENTER (OK).

➜ Follow the instructions shown on the TV to

confirm the selection (if any).

➜ If a blank/distorted TV screen appears, wait for

15 seconds for auto recovery to activate.

Setting the TV display

Set the aspect ratio of the DVD receiver according

to the TV you have connected. The format you

select must be available on the disc. If it is not, the

TV display setting will not affect the picture during

playback.

1 In DVD/CD mode, press SET UP.

2 Press 3 repeatedly to select [VIDEO SETUP

PAGE].

3 Press 5∞ to highlight [TV DISPLAY], then press 3.

TV TYPE

TV DISPLAY

PROGRESSIVE

PICTURE SETTING

BLACK LEVEL

CLOSED CAPTION

4:3 PAN SCAN

4:3 LETTER BOX

16:9

4 Press 5∞ to highlight one of the options below:

4:3 PAN SCAN – Select this if you have a

conventional TV and want both sides of the picture

to be trimmed or formatted to fit your TV screen.

4:3 LETTER BOX – Select this if you have a

conventional TV. In this case, a wide picture with

black bands on the upper and lower portions of

the TV screen will be displayed.

16:9 – Select this if you have a wide-screen TV.

5 Select a setting and press ENTER (OK).

VIDEO SETUP PAGE

To return to the previous menu, press 2.

To clear the menu, press SET UP.

TIPS:

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 52 53

Comments to this Manuals

No comments

Yamaha KBP-300 Owner's Manual Page 23

Comments to this Manuals

Related products and manuals for Home cinema systems Yamaha KBP-300