Yamaha KBP-300 Owner's Manual download pdf (Page 36)

Progressive function - (on/off)

The progressive scan display present 60 complete

frames per seconds, rather than 30 frames per

second of interlaced scanning (ordinary normal TV

system). With nearly double the number of lines,

progressive scan offers higher picture resolution

and eliminates bothersome motion artifacts those

jagged edge on moving objects.

IMPORTANT!

Before enabling the progressive scan

function, you must ensure:

1)Turn on your TV progressive scan function (refer

to your TV owner’s manual).

2)You have connected the DVD receiver

to your TV using Y P

B PR (see “Connecting a

Progressive Scan TV” on page 14).

1 In ‘VIDEO SETUP PAGE’, press 5∞ to highlight

[PROGRESSIVE], then press 3.

OFF

Select this to disable progressive scan function.

Select this to enable progressive scan function.

2 Press 5∞ to select a setting and press ENTER

(OK) to confirm.

➜ Follow the instructions shown on the TV to

confirm the selection (if any).

➜ If a blank/distorted TV screen appears, wait for

15 seconds for auto recovery to activate.

DVD Setup Menu Options

TIPS:

To return to the previous menu, press 2.

To clear the menu, press SET UP.

Picture settings

This receiver comes with three predefined sets of

picture color settings and one personal setting that

you can define yourself.

1 In ‘VIDEO SETUP PAGE’, press 5∞ to highlight

[PICTURE SETTING], then press 3.

STANDARD

Select this for the standard picture setting.

BRIGHT

Select this to make the TV picture brighter.

SOFT

Select this to make the TV picture softer.

PERSONAL

Select this to personalise your picture color by

adjusting the brightness, contrast, tint and color

(saturation).

BRIGHTNESS

CONTRAST

TINT

COLOR

PERSONAL PICTURE SETUP

2 Press 5∞ to select a setting and press ENTER

(OK) to confirm.

3 If you select [PERSONAL], proceed to steps

4~7.

➜ The ‘PERSONAL PICTURE SETUP’ menu

appears.

4 Press 5∞ to highlight one of the following options.

BRIGHTNESS

Increase the value to brighten the picture or vice

versa. Zero (0) is the average setting value.

CONTRAST

Increase the value to sharpen the picture or vice

versa. Zero (0) is the average contrast.

TINT

Increase or decrease the value to change the color

phase of the picture. Zero (0) is the average setting

value.

COLOR

Increase the value to enhance the color in your

picture or vice versa. Zero (0) is the average color

setting value.

5 Press 2 3 to adjust the setting that best suits your

personal preference.

6 Repeat steps 4~5 to adjust other color features

if desired.

7 Press ENTER (OK) to confirm.

Selecting the black level (U.S.A.

model only)

If you set the TV type to NTSC, set Black level shift

to ON. This will improve the color contrast during

playback. The black level setting has no effect if the

TV type is set to PAL.

Select this to enhance the black level.

OFF

Select this for the standard black level setting.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 52 53

Comments to this Manuals

No comments

Yamaha KBP-300 Owner's Manual Page 36

Comments to this Manuals

Related products and manuals for Home cinema systems Yamaha KBP-300