Yamaha UX96 Owner's Manual download pdf (Page 24)

● THRU output of MIDI signals (MIDI IN → MIDI OUT)

You can route MIDI signals received at the input port(s) of the UX96 directly to

the output port(s) of the UX96 (this is called THRU output). This routing is useful

when you wish to route MIDI signals from a MIDI keyboard directly to a tone

generator. The left column shows the UX96’s output ports (1–6), and the top

column shows the UX96’s input ports (1–2). To enable this function, check the

“Thru ON/OFF” check box in the lower right corner of the screen.

If you check multiple check boxes vertically, a MIDI signal from one input port on

the UX96 is distributed to multiple output ports on the UX96. If you check

multiple check boxes horizontally, MIDI signals from multiple input ports on the

UX96 are merged and transmitted to one output port on the UX96.

See page 20 for more information on the relationship between the UX96’s I/O ports

and the port numbers.

For Macintosh, this function is valid only when the MIDI Patch screen or sequence

software is running.

NOTE

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30

No comments

Yamaha UX96 Owner's Manual Page 24