USB-MIDI INTERFACEOwner's ManualBedienungsanleitungMode d'emploiEnglishDeutschFrançais
10Installing the DriverTo operate the UX96, you need to install the driver on the computer correctly.The USB-MIDI driver is software that transmits MI
11Windows users:● Installing the driver on a Windows98/Me system1. Start the computer.2. Insert the included CD-ROM into the CD-ROM drive.3. Use the i
125. Check the radio button to the left of “Search for the best driver for your device. (Recommended).” Click [Next].The system displays a screen that
138. When the installation is complete, the following screen appears.Click [Finish].Some computers may take about ten seconds to show this screen afte
148. Restart the computer.The driver has been installed.● Selecting the destination for the MIDI signal outputThis section explains how to set up the
15● Using two or more UX96sFollow the steps below to connect two or more UX96s. You do not need to re-install the driver.1. Start the computer.2. Use
163. Double-click the CD-ROM icon and double-click the “Install USB Driver” icon to display the following installation screen.4. The “Install Location
177. When the installation is complete, the system displays the following message: “Installation was successful. You have installed software which req
187. After the search operation is complete, make sure that “USB-MIDI 1” is listed in the “OMS Driver Setup” dialog, then click [OK].If the UX96 is no
1910. After you save the file, the system displays the following window.The setting is complete if a “” mark appears before the file name.You can also
SPECIAL MESSAGE SECTIONThis product utilizes an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than
20Changing the driver setting (MIDI Patch Screen)You can change the assignment of I/O ports on the UX96 and port numbers selected from your computer.S
21● Starting the MIDI Patch screenThe start-up method and the MIDI Patch screen differ slightly for Windows and Macintosh systems. However, the basic
22● Checking the signal pathTo see if the MIDI device is connected correctly, you can try transmitting MIDI signals.• Note Off MessageWhen you click [
23● Changing connections during recording (MIDI IN → PC IN)You can change the I/O assignment of the computer’s input port and the UX96’s input port. T
24● THRU output of MIDI signals (MIDI IN → MIDI OUT)You can route MIDI signals received at the input port(s) of the UX96 directly to the output port(s
25Troubleshooting (FAQ)● The driver cannot be installed.• Is the USB cable connected correctly?→ Check the USB cable connection. (page 9)→ Disconnect
26● The UX96 does not operate correctly, or no sound is heard.• Did you install the driver? (page 10)• Are the USB cable, MIDI cables, serial cables,
27● How can I delete or re-install the driver?[Windows Me/98]1. When the UX96 is recognized correctly, double-click “System” in the Con-trol Panel to
• This applies only to products distributed by Yamaha Canada Music Ltd.• Ceci ne s’applique qu’aux produits distribués par Yamaha Canada Musique Ltée.
For details of products, please contact your nearest Yamaha or the authorized distributor listed below.Pour plus de détails sur les produits, veuillez
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep these precautions in a safe place for future reference. WARNINGAlways follow the bas
This document is printed on recycled chlorine free (ECF) paper with soy ink.Auf Recycling-Umweltpapier gedruckt.Ce document a été imprimé sur du papie
4Welcome to the UX96Thank you for choosing the Yamaha UX96 USB-MIDI interface.The UX96 is a MIDI interface that features fast data transfer via USB co
5UX96 Features● 96-channel Simultaneous PlaybackYou can use both MIDI IN/OUT terminals and the TO TG/INST terminal (equivalent to a serial port on a c
6Package ContentsThe UX96 package contains the following items. Check the contents for missing items.• USB-MIDI interface (UX96 main unit)• CD-ROM (Wi
7System Requirements[Windows]OS: Windows98/Me/2000Computer: USB-supported IBM-PC or compatible computerCPU: Pentium 166MHz or higherMemory: 32 MB or h
8Parts and Functions1 Power LEDThis LED lights up when the USB terminal is connected and the power is being supplied to the UX96.2 Terminal LEDsThese
9ConnectionThis chapter explains how to connect MIDI devices, such as a tone generator and a MIDI keyboard, to the UX96.1. Connecting a computerConnec
Comments to this Manuals